CHIEFL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CHIEFL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	DgR1h*
1772723961	13.88 Volt	110 Pkt	25 Pcnt	0.88 Pcnt
1772722156	13.88 Volt	160 Pkt	29 Pcnt	0.61 Pcnt
1772720356	13.88 Volt	230 Pkt	33 Pcnt	0.42 Pcnt
1772718556	13.88 Volt	300 Pkt	39 Pcnt	0.33 Pcnt
1772716756	13.88 Volt	390 Pkt	46 Pcnt	0.25 Pcnt
1772714956	13.88 Volt	450 Pkt	43 Pcnt	0.22 Pcnt
1772713156	13.88 Volt	400 Pkt	40 Pcnt	0.25 Pcnt
1772711360	13.88 Volt	410 Pkt	39 Pcnt	0.24 Pcnt
1772709556	13.88 Volt	400 Pkt	39 Pcnt	0.25 Pcnt
1772707756	13.88 Volt	340 Pkt	38 Pcnt	0.29 Pcnt
1772705957	13.88 Volt	290 Pkt	34 Pcnt	0.33 Pcnt
1772704157	13.88 Volt	280 Pkt	35 Pcnt	0.35 Pcnt
1772702357	13.88 Volt	330 Pkt	41 Pcnt	0.3 Pcnt
1772700557	13.88 Volt	380 Pkt	43 Pcnt	0.26 Pcnt
1772698757	13.88 Volt	340 Pkt	39 Pcnt	0.29 Pcnt
1772696957	13.88 Volt	290 Pkt	36 Pcnt	0.34 Pcnt
1772695157	13.88 Volt	270 Pkt	35 Pcnt	0.37 Pcnt
1772693357	13.88 Volt	240 Pkt	33 Pcnt	0.42 Pcnt
1772691557	13.88 Volt	240 Pkt	33 Pcnt	0.41 Pcnt
1772689757	13.88 Volt	310 Pkt	41 Pcnt	0.32 Pcnt
1772687957	13.88 Volt	310 Pkt	41 Pcnt	0.32 Pcnt
1772686157	13.88 Volt	240 Pkt	33 Pcnt	0.41 Pcnt
1772684357	13.88 Volt	200 Pkt	29 Pcnt	0.49 Pcnt
1772682557	13.88 Volt	140 Pkt	25 Pcnt	0.68 Pcnt
1772680757	13.88 Volt	110 Pkt	26 Pcnt	0.88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

DgR1h: 0, 0.001, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)