SQ5TM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ5TM-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*
1772612911	16 ug/m3	28 ug/m3	35 ug/m3	-47 dBm
1772611992	20 ug/m3	33 ug/m3	44 ug/m3	-54 dBm
1772611062	19 ug/m3	35 ug/m3	47 ug/m3	-44 dBm
1772610138	19 ug/m3	31 ug/m3	36 ug/m3	-46 dBm
1772609213	19 ug/m3	31 ug/m3	40 ug/m3	-48 dBm
1772608289	17 ug/m3	31 ug/m3	39 ug/m3	-56 dBm
1772607364	20 ug/m3	33 ug/m3	39 ug/m3	-54 dBm
1772606440	18 ug/m3	28 ug/m3	35 ug/m3	-53 dBm
1772605515	17 ug/m3	29 ug/m3	40 ug/m3	-50 dBm
1772604591	17 ug/m3	29 ug/m3	40 ug/m3	-49 dBm
1772603666	16 ug/m3	28 ug/m3	32 ug/m3	-54 dBm
1772602742	16 ug/m3	28 ug/m3	34 ug/m3	-51 dBm
1772601833	16 ug/m3	26 ug/m3	33 ug/m3	-53 dBm
1772600894	17 ug/m3	32 ug/m3	41 ug/m3	-54 dBm
1772599969	16 ug/m3	27 ug/m3	33 ug/m3	-50 dBm
1772599045	14 ug/m3	25 ug/m3	33 ug/m3	-55 dBm
1772598120	15 ug/m3	25 ug/m3	30 ug/m3	-53 dBm
1772597197	14 ug/m3	23 ug/m3	30 ug/m3	-52 dBm
1772596271	14 ug/m3	24 ug/m3	30 ug/m3	-52 dBm
1772595347	13 ug/m3	22 ug/m3	33 ug/m3	-54 dBm
1772594423	13 ug/m3	21 ug/m3	29 ug/m3	-49 dBm
1772593498	13 ug/m3	23 ug/m3	34 ug/m3	-53 dBm
1772592573	14 ug/m3	24 ug/m3	29 ug/m3	-52 dBm
1772591649	13 ug/m3	20 ug/m3	31 ug/m3	-53 dBm
1772590724	13 ug/m3	23 ug/m3	28 ug/m3	-54 dBm

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

SUN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)