W4VA-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W4VA-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	T1*	Rx10m*	Eff1h*
1757559372	24.5 C	125 Pkt	60 Pcnt
1757559072	24.5 C	114 Pkt	59 Pcnt
1757558772	24.5 C	129 Pkt	58 Pcnt
1757558472	24.5 C	118 Pkt	58 Pcnt
1757558172	24.5 C	112 Pkt	59 Pcnt
1757557872	24.5 C	117 Pkt	58 Pcnt
1757557572	24.5 C	130 Pkt	59 Pcnt
1757557272	24.5 C	131 Pkt	58 Pcnt
1757556972	24.5 C	128 Pkt	58 Pcnt
1757556672	24.5 C	127 Pkt	58 Pcnt
1757556372	24.5 C	144 Pkt	58 Pcnt
1757556072	24.5 C	142 Pkt	59 Pcnt
1757555772	24.5 C	124 Pkt	59 Pcnt
1757555472	25 C	118 Pkt	59 Pcnt
1757555172	25 C	127 Pkt	60 Pcnt
1757554872	25.5 C	138 Pkt	59 Pcnt
1757554572	25.5 C	149 Pkt	59 Pcnt
1757554272	25 C	156 Pkt	60 Pcnt
1757553972	25.5 C	132 Pkt	61 Pcnt
1757553672	26 C	123 Pkt	61 Pcnt
1757553372	26 C	136 Pkt	61 Pcnt
1757553072	27 C	137 Pkt	60 Pcnt
1757552779	27.5 C	155 Pkt	60 Pcnt
1757552472	27.5 C	174 Pkt	59 Pcnt
1757552187	26.5 C	147 Pkt	59 Pcnt

*Used Equation Coefficients:

T1: 0, 0.5, -64

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

Eff1h: 0, 1, 0

DgR1h: 0, 0.001, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)