UCAPK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UCAPK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	DgS1h*	Eff1h*
1753456575	13.95 Volt	10 Pkt	0 Pcnt	28 Pcnt
1753456290	14.03 Volt	10 Pkt	0 Pcnt	29 Pcnt
1753455975	13.95 Volt	10 Pkt	0 Pcnt	29 Pcnt
1753455675	13.8 Volt	10 Pkt	0 Pcnt	31 Pcnt
1753455375	13.95 Volt	10 Pkt	0 Pcnt	28 Pcnt
1753455075	13.95 Volt	10 Pkt	0 Pcnt	28 Pcnt
1753454775	14.03 Volt	10 Pkt	0 Pcnt	26 Pcnt
1753454475	13.95 Volt	10 Pkt	0 Pcnt	26 Pcnt
1753454175	13.95 Volt	10 Pkt	0 Pcnt	27 Pcnt
1753453875	13.95 Volt	10 Pkt	0 Pcnt	25 Pcnt
1753453575	14.03 Volt	10 Pkt	0 Pcnt	25 Pcnt
1753452975	13.95 Volt	10 Pkt	0 Pcnt	23 Pcnt
1753452675	13.95 Volt	10 Pkt	0 Pcnt	23 Pcnt
1753452397	13.8 Volt	10 Pkt	0 Pcnt	23 Pcnt
1753452075	13.95 Volt	10 Pkt	0 Pcnt	23 Pcnt
1753451775	13.95 Volt	10 Pkt	0 Pcnt	21 Pcnt
1753451475	13.95 Volt	10 Pkt	0 Pcnt	21 Pcnt
1753451175	13.95 Volt	10 Pkt	0 Pcnt	21 Pcnt
1753450889	13.8 Volt	10 Pkt	0 Pcnt	20 Pcnt
1753450575	13.95 Volt	10 Pkt	0 Pcnt	19 Pcnt
1753450275	13.95 Volt	10 Pkt	0 Pcnt	19 Pcnt
1753449975	13.95 Volt	10 Pkt	0 Pcnt	20 Pcnt
1753449375	13.95 Volt	10 Pkt	0 Pcnt	21 Pcnt
1753449075	13.95 Volt	10 Pkt	0 Pcnt	21 Pcnt
1753447875	13.88 Volt	10 Pkt	2.38 Pcnt	28 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

DgS1h: 0, 0.001, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)