DF0OH-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF0OH-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RH_out*	T_out*	RH_in*	T_in*	Fan%*
1765574431	100 %	5.7 C	98.8 %	9.6 C	0 % on
1765573187	100 %	5.7 C	98.8 %	9.6 C	0 % on
1765571911	100 %	5.8 C	98.9 %	9.6 C	0 % on
1765570656	100 %	5.7 C	99 %	9.6 C	0 % on
1765569380	100 %	5.8 C	99.1 %	9.6 C	0 % on
1765568124	100 %	5.6 C	99.2 %	9.6 C	0 % on
1765566859	100 %	5.8 C	99.3 %	9.7 C	0 % on
1765565561	100 %	6.3 C	99.5 %	9.7 C	0 % on
1765564307	100 %	6.4 C	99.5 %	9.7 C	0 % on
1765563061	100 %	7 C	99.6 %	9.7 C	0 % on
1765561775	100 %	7.2 C	99.6 %	9.7 C	0 % on
1765560519	100 %	7.2 C	99.7 %	9.7 C	0 % on
1765559198	100 %	7.6 C	99.7 %	9.7 C	0 % on
1765557924	100 %	7.7 C	99.7 %	9.7 C	0 % on
1765556634	100 %	7.9 C	99.8 %	9.7 C	0 % on
1765554136	100 %	8.6 C	99.8 %	9.7 C	0 % on
1765552881	100 %	9 C	99.9 %	9.7 C	0 % on
1765550361	100 %	10.3 C	100 %	9.7 C	0 % on
1765549129	100 %	10.8 C	100 %	9.7 C	0 % on
1765547883	100 %	11.4 C	100 %	9.7 C	0 % on
1765546608	100 %	11.8 C	100 %	9.6 C	0 % on
1765545350	100 %	12.1 C	100 %	9.6 C	0 % on
1765544086	100 %	12.1 C	100 %	9.6 C	0 % on
1765542808	100 %	11.4 C	100 %	9.6 C	0 % on
1765541541	100 %	11.2 C	100 %	9.6 C	0 % on

*Used Equation Coefficients:

RH_out: 0, 1, 0

T_out: 0, 1, -100

RH_in: 0, 1, 0

T_in: 0, 1, -100

Fan%: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)