SHOJCT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SHOJCT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1780598447	13.73 Volt	410 Pkt	90 Pkt	80 Pcnt	89.6 F
1780597847	13.73 Volt	440 Pkt	100 Pkt	82 Pcnt	88.7 F
1780597247	13.73 Volt	480 Pkt	120 Pkt	83 Pcnt	88.7 F
1780596647	13.73 Volt	480 Pkt	120 Pkt	83 Pcnt	88.7 F
1780596047	13.73 Volt	470 Pkt	120 Pkt	85 Pcnt	87.8 F
1780595447	13.73 Volt	470 Pkt	120 Pkt	85 Pcnt	87.8 F
1780594847	13.73 Volt	470 Pkt	130 Pkt	84 Pcnt	86.9 F
1780594247	13.73 Volt	470 Pkt	130 Pkt	85 Pcnt	86.9 F
1780593647	13.73 Volt	460 Pkt	130 Pkt	86 Pcnt	86 F
1780593047	13.05 Volt	470 Pkt	130 Pkt	85 Pcnt	86 F
1780592447	13.73 Volt	500 Pkt	140 Pkt	84 Pcnt	85.1 F
1780591847	13.73 Volt	540 Pkt	160 Pkt	84 Pcnt	85.1 F
1780591247	13.73 Volt	530 Pkt	160 Pkt	84 Pcnt	85.1 F
1780590647	13.73 Volt	560 Pkt	170 Pkt	82 Pcnt	84.2 F
1780590047	13.73 Volt	570 Pkt	190 Pkt	80 Pcnt	84.2 F
1780589447	12.98 Volt	590 Pkt	200 Pkt	79 Pcnt	83.3 F
1780588847	13.73 Volt	620 Pkt	220 Pkt	77 Pcnt	83.3 F
1780588247	13.73 Volt	640 Pkt	220 Pkt	76 Pcnt	82.4 F
1780587647	13.73 Volt	660 Pkt	230 Pkt	75 Pcnt	81.5 F
1780587047	13.73 Volt	690 Pkt	250 Pkt	73 Pcnt	81.5 F
1780586447	13.73 Volt	690 Pkt	250 Pkt	72 Pcnt	80.6 F
1780585847	13.73 Volt	730 Pkt	260 Pkt	71 Pcnt	79.7 F
1780585247	13.13 Volt	760 Pkt	280 Pkt	71 Pcnt	79.7 F
1780584647	13.73 Volt	820 Pkt	290 Pkt	70 Pcnt	77.9 F
1780584047	13.73 Volt	910 Pkt	310 Pkt	70 Pcnt	77.9 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)