VA3RAW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3RAW-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1772722452	12.53 Volt	50 Pkt	58 Pcnt	8 Pkt
1772722152	12.53 Volt	50 Pkt	57 Pcnt	14 Pkt
1772721852	12.53 Volt	40 Pkt	52 Pcnt	18 Pkt
1772721552	12.53 Volt	40 Pkt	52 Pcnt	14 Pkt
1772721252	12.53 Volt	40 Pkt	51 Pcnt	7 Pkt
1772720952	12.53 Volt	50 Pkt	57 Pcnt	10 Pkt
1772720678	12.53 Volt	60 Pkt	60 Pcnt	10 Pkt
1772720352	12.53 Volt	70 Pkt	62 Pcnt	0 Pkt
1772720052	12.53 Volt	80 Pkt	67 Pcnt	2 Pkt
1772719752	12.53 Volt	90 Pkt	70 Pcnt	8 Pkt
1772719452	12.53 Volt	90 Pkt	72 Pcnt	0 Pkt
1772719152	12.53 Volt	110 Pkt	77 Pcnt	0 Pkt
1772718852	12.53 Volt	130 Pkt	82 Pcnt	4 Pkt
1772718552	12.53 Volt	140 Pkt	83 Pcnt	13 Pkt
1772717952	12.53 Volt	140 Pkt	79 Pcnt	24 Pkt
1772717652	12.53 Volt	140 Pkt	78 Pcnt	23 Pkt
1772717352	12.53 Volt	130 Pkt	73 Pcnt	22 Pkt
1772717052	12.53 Volt	140 Pkt	74 Pcnt	23 Pkt
1772716752	12.53 Volt	140 Pkt	72 Pcnt	21 Pkt
1772716452	12.53 Volt	130 Pkt	70 Pcnt	20 Pkt
1772716152	12.53 Volt	140 Pkt	71 Pcnt	29 Pkt
1772715552	12.53 Volt	140 Pkt	72 Pcnt	29 Pkt
1772715252	12.53 Volt	140 Pkt	71 Pcnt	24 Pkt
1772714952	12.53 Volt	130 Pkt	71 Pcnt	12 Pkt
1772714652	12.53 Volt	140 Pkt	71 Pcnt	13 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)