VK4RBO-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBO-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Rx1h*	Dg1h*	Eff1h*
1788666830	13.84 Volt	350 Pkt	90 Pkt	83 Pcnt
1788666224	13.84 Volt	360 Pkt	90 Pkt	82 Pcnt
1788665624	13.84 Volt	350 Pkt	100 Pkt	82 Pcnt
1788665024	13.84 Volt	340 Pkt	100 Pkt	84 Pcnt
1788664424	13.84 Volt	340 Pkt	90 Pkt	84 Pcnt
1788663824	13.84 Volt	340 Pkt	100 Pkt	84 Pcnt
1788663226	13.84 Volt	320 Pkt	100 Pkt	84 Pcnt
1788662624	13.84 Volt	330 Pkt	100 Pkt	86 Pcnt
1788662024	13.84 Volt	350 Pkt	100 Pkt	87 Pcnt
1788661424	13.84 Volt	330 Pkt	90 Pkt	86 Pcnt
1788660824	13.84 Volt	330 Pkt	90 Pkt	84 Pcnt
1788660224	13.84 Volt	320 Pkt	90 Pkt	83 Pcnt
1788659625	13.84 Volt	340 Pkt	90 Pkt	83 Pcnt
1788659024	13.84 Volt	350 Pkt	90 Pkt	83 Pcnt
1788658424	13.84 Volt	370 Pkt	100 Pkt	83 Pcnt
1788657824	13.84 Volt	370 Pkt	90 Pkt	84 Pcnt
1788657224	13.84 Volt	410 Pkt	100 Pkt	84 Pcnt
1788656624	13.84 Volt	440 Pkt	110 Pkt	84 Pcnt
1788656029	13.84 Volt	420 Pkt	110 Pkt	83 Pcnt
1788655429	13.84 Volt	430 Pkt	110 Pkt	81 Pcnt
1788654824	13.84 Volt	420 Pkt	110 Pkt	80 Pcnt
1788654224	13.84 Volt	410 Pkt	110 Pkt	78 Pcnt
1788653624	13.84 Volt	400 Pkt	100 Pkt	79 Pcnt
1788653024	13.84 Volt	400 Pkt	100 Pkt	77 Pcnt
1788652430	13.84 Volt	420 Pkt	100 Pkt	78 Pcnt

*Used Equation Coefficients:

Battery: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

NA: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)