N0QVC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N0QVC-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753613989	14.14 Volt	1220 Pkt	260 Pkt	63 Pcnt
1753610386	14.14 Volt	1070 Pkt	220 Pkt	62 Pcnt
1753606783	14.14 Volt	1240 Pkt	240 Pkt	66 Pcnt
1753606782	14.14 Volt	1240 Pkt	240 Pkt	66 Pcnt
1753603180	14.14 Volt	1230 Pkt	250 Pkt	65 Pcnt
1753603179	14.14 Volt	1230 Pkt	250 Pkt	65 Pcnt
1753599575	14.14 Volt	1340 Pkt	300 Pkt	66 Pcnt
1753595974	14.14 Volt	1330 Pkt	290 Pkt	67 Pcnt
1753595972	14.14 Volt	1330 Pkt	290 Pkt	67 Pcnt
1753592374	14.14 Volt	1240 Pkt	230 Pkt	63 Pcnt
1753592368	14.14 Volt	1240 Pkt	230 Pkt	63 Pcnt
1753588765	14.14 Volt	1170 Pkt	250 Pkt	62 Pcnt
1753585161	14.14 Volt	1240 Pkt	260 Pkt	64 Pcnt
1753581558	14.14 Volt	1190 Pkt	310 Pkt	62 Pcnt
1753574351	14.14 Volt	1000 Pkt	230 Pkt	59 Pcnt
1753574351	14.14 Volt	1000 Pkt	230 Pkt	59 Pcnt
1753570751	14.14 Volt	990 Pkt	230 Pkt	61 Pcnt
1753570747	14.14 Volt	990 Pkt	230 Pkt	61 Pcnt
1753567144	14.14 Volt	1100 Pkt	230 Pkt	67 Pcnt
1753563544	14.14 Volt	980 Pkt	220 Pkt	62 Pcnt
1753563540	14.14 Volt	980 Pkt	220 Pkt	62 Pcnt
1753559945	14.14 Volt	870 Pkt	210 Pkt	64 Pcnt
1753556336	14.14 Volt	800 Pkt	230 Pkt	61 Pcnt
1753556333	14.14 Volt	800 Pkt	230 Pkt	61 Pcnt
1753552733	14.14 Volt	740 Pkt	180 Pkt	58 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)