SP2GDZ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2GDZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1757544073	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	0 count/10m	5 count/10m
1757542873	0.03 Rx Erlang	0.01 Tx Erlang	23 count/10m	0 count/10m	4 count/10m
1757541673	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	1 count/10m	4 count/10m
1757540473	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	4 count/10m
1757539273	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	1 count/10m	6 count/10m
1757538073	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	1 count/10m	5 count/10m
1757535673	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	1 count/10m	5 count/10m
1757534473	0.03 Rx Erlang	0.01 Tx Erlang	23 count/10m	1 count/10m	5 count/10m
1757533273	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	1 count/10m	4 count/10m
1757532073	0.04 Rx Erlang	0.01 Tx Erlang	30 count/10m	1 count/10m	7 count/10m
1757530873	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	1 count/10m	6 count/10m
1757529673	0.05 Rx Erlang	0.01 Tx Erlang	45 count/10m	1 count/10m	4 count/10m
1757527273	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	5 count/10m
1757524873	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	1 count/10m	7 count/10m
1757523673	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	1 count/10m	4 count/10m
1757522473	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	1 count/10m	4 count/10m
1757521273	0.04 Rx Erlang	0.01 Tx Erlang	36 count/10m	1 count/10m	5 count/10m
1757520073	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	1 count/10m	4 count/10m
1757518873	0.05 Rx Erlang	0.01 Tx Erlang	39 count/10m	1 count/10m	5 count/10m
1757517673	0.05 Rx Erlang	0.01 Tx Erlang	39 count/10m	1 count/10m	5 count/10m
1757516473	0.03 Rx Erlang	0.01 Tx Erlang	33 count/10m	1 count/10m	6 count/10m
1757515273	0.04 Rx Erlang	0.01 Tx Erlang	37 count/10m	1 count/10m	5 count/10m
1757514074	0.04 Rx Erlang	0.01 Tx Erlang	33 count/10m	0 count/10m	5 count/10m
1757512873	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	1 count/10m	4 count/10m
1757511673	0.04 Rx Erlang	0.01 Tx Erlang	39 count/10m	1 count/10m	4 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)