DB0REI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0REI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	A2*	A3*	A4*	A5*
1780553971	12.3 Volt	0 None	0 None	0 None	0 None
1780553073	12.3 Volt	0 None	0 None	0 None	0 None
1780552172	12.3 Volt	0 None	0 None	0 None	0 None
1780551270	12.3 Volt	0 None	0 None	0 None	0 None
1780549475	12.23 Volt	0 None	0 None	0 None	0 None
1780548571	12.3 Volt	0 None	0 None	0 None	0 None
1780547669	12.3 Volt	0 None	0 None	0 None	0 None
1780544071	12.3 Volt	0 None	0 None	0 None	0 None
1780543174	12.3 Volt	0 None	0 None	0 None	0 None
1780542274	12.3 Volt	0 None	0 None	0 None	0 None
1780541372	12.3 Volt	0 None	0 None	0 None	0 None
1780540474	12.3 Volt	0 None	0 None	0 None	0 None
1780539576	12.3 Volt	0 None	0 None	0 None	0 None
1780538674	12.23 Volt	0 None	0 None	0 None	0 None
1780537773	12.3 Volt	0 None	0 None	0 None	0 None
1780535972	12.3 Volt	0 None	0 None	0 None	0 None
1780535071	12.23 Volt	0 None	0 None	0 None	0 None
1780534173	12.3 Volt	0 None	0 None	0 None	0 None
1780533269	12.3 Volt	0 None	0 None	0 None	0 None
1780532372	12.3 Volt	0 None	0 None	0 None	0 None
1780530572	12.3 Volt	0 None	0 None	0 None	0 None
1780529672	12.3 Volt	0 None	0 None	0 None	0 None
1780528771	12.3 Volt	0 None	0 None	0 None	0 None
1780527872	12.3 Volt	0 None	0 None	0 None	0 None
1780526975	12.3 Volt	0 None	0 None	0 None	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

A2: 0, 0, 0

A3: 0, 0, 0

A4: 0, 0, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)