SV3ISZ-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SV3ISZ-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1773130222	14.25 Volt	190 Pkt	40 Pkt	48 Pcnt	68 Pcnt
1773119402	12.08 Volt	240 Pkt	60 Pkt	58 Pcnt	68 Pcnt
1773108592	12.53 Volt	120 Pkt	60 Pkt	44 Pcnt	68 Pcnt
1773097782	12.68 Volt	110 Pkt	60 Pkt	41 Pcnt	68 Pcnt
1773086972	12.75 Volt	330 Pkt	110 Pkt	71 Pcnt	68 Pcnt
1773076162	12.9 Volt	440 Pkt	150 Pkt	72 Pcnt	68 Pcnt
1773065353	14.18 Volt	180 Pkt	70 Pkt	38 Pcnt	68 Pcnt
1773054542	14.25 Volt	180 Pkt	70 Pkt	51 Pcnt	68 Pcnt
1773043731	14.18 Volt	230 Pkt	70 Pkt	51 Pcnt	68 Pcnt
1773032923	12.38 Volt	220 Pkt	60 Pkt	54 Pcnt	68 Pcnt
1773022110	12.53 Volt	120 Pkt	60 Pkt	52 Pcnt	68 Pcnt
1773011300	12.6 Volt	220 Pkt	150 Pkt	68 Pcnt	68 Pcnt
1773000489	12.75 Volt	280 Pkt	110 Pkt	51 Pcnt	68 Pcnt
1772989680	12.9 Volt	260 Pkt	80 Pkt	71 Pcnt	68 Pcnt
1772978870	14.1 Volt	170 Pkt	70 Pkt	51 Pcnt	68 Pcnt
1772968067	14.18 Volt	250 Pkt	80 Pkt	46 Pcnt	68 Pcnt
1772957248	14.03 Volt	300 Pkt	90 Pkt	62 Pcnt	68 Pcnt
1772946441	12.45 Volt	320 Pkt	120 Pkt	54 Pcnt	68 Pcnt
1772935628	12.53 Volt	80 Pkt	20 Pkt	30 Pcnt	68 Pcnt
1772924818	12.68 Volt	130 Pkt	70 Pkt	43 Pcnt	68 Pcnt
1772914009	12.75 Volt	240 Pkt	80 Pkt	48 Pcnt	68 Pcnt
1772903197	12.9 Volt	200 Pkt	60 Pkt	53 Pcnt	68 Pcnt
1772892387	14.03 Volt	180 Pkt	60 Pkt	45 Pcnt	68 Pcnt
1772881577	14.1 Volt	240 Pkt	80 Pkt	53 Pcnt	68 Pcnt
1772870766	13.73 Volt	290 Pkt	90 Pkt	78 Pcnt	68 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)