VA5EVR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA5EVR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	HouseTemp*	BoilerBtu*
1765648212	18.7 degC	5391 btu
1765647611	18.3 degC	5284 btu
1765645212	17.7 degC	4920 btu
1765644617	18 degC	4920 btu
1765644011	18.6 degC	4936 btu
1765643412	18.7 degC	4936 btu
1765642811	17.8 degC	4936 btu
1765642211	18.3 degC	4936 btu
1765641012	17.7 degC	5193 btu
1765640411	18.1 degC	5316 btu
1765639812	18.9 degC	5316 btu
1765639212	17.7 degC	5316 btu
1765638634	18 degC	5350 btu
1765637412	18 degC	5133 btu
1765636812	17.8 degC	5043 btu
1765636213	18.5 degC	5043 btu
1765635012	17.8 degC	5108 btu
1765634411	18.4 degC	5215 btu
1765633811	18.9 degC	5215 btu
1765633211	17.7 degC	5215 btu
1765632631	18.2 degC	5215 btu
1765632012	18.8 degC	5269 btu
1765631412	17.6 degC	5396 btu
1765630811	18 degC	5523 btu
1765630211	18.7 degC	5545 btu

*Used Equation Coefficients:

BoilerCapacity: 0, 1, 0

HouseTemp: 0, 1, 0

FurnDC: 0, 1, 0

FurnDC24: 0, 1, 0

BoilerBtu: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)