Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object 9M2HER. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1755788800 0 Pkt 5 Pkt 0 Pkt -82 dBm 5.25 V
1755787642 0 Pkt 14 Pkt 0 Pkt -81 dBm 5.25 V
1755786418 0 Pkt 20 Pkt 0 Pkt -82 dBm 5.25 V
1755785191 0 Pkt 34 Pkt 0 Pkt -84 dBm 5.25 V
1755783965 0 Pkt 34 Pkt 0 Pkt -82 dBm 5.25 V
1755782739 0 Pkt 79 Pkt 0 Pkt -82 dBm 5.25 V
1755780283 0 Pkt 74 Pkt 0 Pkt -80 dBm 5.25 V
1755779055 0 Pkt 61 Pkt 0 Pkt -79 dBm 5.25 V
1755777827 0 Pkt 101 Pkt 0 Pkt -79 dBm 5.25 V
1755776600 0 Pkt 30 Pkt 0 Pkt -79 dBm 5.25 V
1755775375 0 Pkt 111 Pkt 0 Pkt -79 dBm 5.25 V
1755774147 0 Pkt 97 Pkt 0 Pkt -80 dBm 5.25 V
1755772919 0 Pkt 83 Pkt 0 Pkt -79 dBm 5.25 V
1755771691 0 Pkt 94 Pkt 0 Pkt -79 dBm 5.25 V
1755770464 0 Pkt 74 Pkt 0 Pkt -79 dBm 5.25 V
1755769236 0 Pkt 101 Pkt 0 Pkt -79 dBm 5.25 V
1755766779 0 Pkt 47 Pkt 0 Pkt -78 dBm 5.25 V
1755765552 0 Pkt 48 Pkt 0 Pkt -80 dBm 5.23 V
1755764325 0 Pkt 56 Pkt 0 Pkt -80 dBm 5.23 V
1755763098 0 Pkt 93 Pkt 0 Pkt -80 dBm 5.25 V
1755761872 0 Pkt 62 Pkt 0 Pkt -79 dBm 5.25 V
1755760645 0 Pkt 133 Pkt 0 Pkt -79 dBm 5.25 V
1755758187 0 Pkt 32 Pkt 0 Pkt -79 dBm 5.25 V
1755756961 0 Pkt 44 Pkt 0 Pkt -80 dBm 5.25 V
1755755734 0 Pkt 23 Pkt 0 Pkt -79 dBm 5.25 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)