SR5MRF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5MRF. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1784689308	13.43 Volt	130 Pkt	10 Pkt	80 Pcnt	30 Pkt
1784689129	13.43 Volt	130 Pkt	10 Pkt	80 Pcnt	30 Pkt
1784688708	13.43 Volt	110 Pkt	10 Pkt	80 Pcnt	20 Pkt
1784688109	13.43 Volt	120 Pkt	10 Pkt	82 Pcnt	20 Pkt
1784687869	13.43 Volt	120 Pkt	10 Pkt	84 Pcnt	30 Pkt
1784687509	13.43 Volt	120 Pkt	10 Pkt	86 Pcnt	30 Pkt
1784686909	13.43 Volt	120 Pkt	10 Pkt	85 Pcnt	20 Pkt
1784686609	13.43 Volt	120 Pkt	10 Pkt	86 Pcnt	20 Pkt
1784686309	13.43 Volt	120 Pkt	10 Pkt	86 Pcnt	30 Pkt
1784685709	13.35 Volt	110 Pkt	10 Pkt	86 Pcnt	20 Pkt
1784685109	13.35 Volt	120 Pkt	10 Pkt	85 Pcnt	20 Pkt
1784684509	13.35 Volt	120 Pkt	10 Pkt	84 Pcnt	30 Pkt
1784684089	13.43 Volt	120 Pkt	10 Pkt	84 Pcnt	20 Pkt
1784683909	13.35 Volt	110 Pkt	10 Pkt	84 Pcnt	20 Pkt
1784683309	13.35 Volt	120 Pkt	10 Pkt	82 Pcnt	30 Pkt
1784682829	13.35 Volt	120 Pkt	10 Pkt	82 Pcnt	20 Pkt
1784682709	13.43 Volt	110 Pkt	10 Pkt	83 Pcnt	20 Pkt
1784682109	13.43 Volt	120 Pkt	10 Pkt	82 Pcnt	20 Pkt
1784681569	13.43 Volt	120 Pkt	10 Pkt	79 Pcnt	40 Pkt
1784681509	13.43 Volt	110 Pkt	10 Pkt	78 Pcnt	30 Pkt
1784680909	13.35 Volt	120 Pkt	10 Pkt	77 Pcnt	20 Pkt
1784680309	13.43 Volt	120 Pkt	10 Pkt	78 Pcnt	30 Pkt
1784680309	13.43 Volt	120 Pkt	10 Pkt	78 Pcnt	30 Pkt
1784679709	13.43 Volt	120 Pkt	10 Pkt	80 Pcnt	20 Pkt
1784679109	13.43 Volt	120 Pkt	10 Pkt	79 Pcnt	20 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)