TA5GLT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA5GLT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1757546547	4 Pkt	13 Pkt	-64 dBm	11.89 V
1757545859	6 Pkt	17 Pkt	-58 dBm	11.89 V
1757545519	6 Pkt	17 Pkt	-58 dBm	11.89 V
1757545179	6 Pkt	14 Pkt	-59 dBm	11.89 V
1757544842	8 Pkt	23 Pkt	-58 dBm	11.89 V
1757544496	11 Pkt	13 Pkt	-58 dBm	11.87 V
1757544160	15 Pkt	14 Pkt	-59 dBm	11.89 V
1757543825	12 Pkt	13 Pkt	-58 dBm	11.89 V
1757543490	14 Pkt	17 Pkt	-58 dBm	11.36 V
1757543150	16 Pkt	10 Pkt	-57 dBm	11.89 V
1757542827	4 Pkt	13 Pkt	-60 dBm	11.89 V
1757542382	5 Pkt	17 Pkt	-58 dBm	11.89 V
1757542041	8 Pkt	13 Pkt	-59 dBm	11.89 V
1757541705	10 Pkt	12 Pkt	-59 dBm	11.89 V
1757541372	11 Pkt	15 Pkt	-59 dBm	11.89 V
1757541033	9 Pkt	12 Pkt	-59 dBm	11.89 V
1757540699	11 Pkt	7 Pkt	-59 dBm	11.89 V
1757540371	9 Pkt	6 Pkt	-59 dBm	11.92 V
1757539692	12 Pkt	10 Pkt	-59 dBm	11.89 V
1757539358	9 Pkt	10 Pkt	-58 dBm	11.89 V
1757539024	13 Pkt	15 Pkt	-62 dBm	11.89 V
1757538685	9 Pkt	11 Pkt	-59 dBm	11.89 V
1757538351	21 Pkt	18 Pkt	-59 dBm	11.87 V
1757538006	10 Pkt	14 Pkt	-57 dBm	11.89 V
1757537669	20 Pkt	16 Pkt	-58 dBm	11.89 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)