E22KKC-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1781539041	11 Pkt	0 Pkt	0 Pkt	-51 dBm	0.02 V
1781537216	17 Pkt	0 Pkt	0 Pkt	-56 dBm	0.02 V
1781535390	13 Pkt	0 Pkt	0 Pkt	-51 dBm	0.02 V
1781533565	8 Pkt	0 Pkt	0 Pkt	-51 dBm	0.02 V
1781531740	2 Pkt	0 Pkt	0 Pkt	-50 dBm	0.02 V
1781529894	20 Pkt	0 Pkt	3 Pkt	-56 dBm	0.02 V
1781528069	18 Pkt	0 Pkt	4 Pkt	-53 dBm	0.02 V
1781526243	14 Pkt	0 Pkt	5 Pkt	-53 dBm	0.02 V
1781524418	18 Pkt	0 Pkt	8 Pkt	-54 dBm	0.02 V
1781522592	30 Pkt	0 Pkt	12 Pkt	-53 dBm	0.02 V
1781520767	13 Pkt	0 Pkt	6 Pkt	-53 dBm	0.02 V
1781518941	8 Pkt	0 Pkt	4 Pkt	-53 dBm	0.02 V
1781517116	12 Pkt	0 Pkt	11 Pkt	-52 dBm	0.02 V
1781515291	21 Pkt	0 Pkt	9 Pkt	-53 dBm	0.02 V
1781513465	44 Pkt	0 Pkt	17 Pkt	-54 dBm	0.02 V
1781511639	1 Pkt	0 Pkt	0 Pkt	-54 dBm	0.02 V
1781509751	16 Pkt	0 Pkt	6 Pkt	-51 dBm	0.02 V
1781507925	24 Pkt	0 Pkt	5 Pkt	-53 dBm	0.02 V
1781506100	4 Pkt	0 Pkt	1 Pkt	-51 dBm	0.02 V
1781504276	24 Pkt	1 Pkt	8 Pkt	-50 dBm	0.02 V
1781502450	27 Pkt	0 Pkt	6 Pkt	-50 dBm	0.02 V
1781500624	21 Pkt	1 Pkt	9 Pkt	-50 dBm	0.02 V
1781498799	24 Pkt	0 Pkt	8 Pkt	-51 dBm	0.02 V
1781496973	27 Pkt	0 Pkt	6 Pkt	-50 dBm	0.02 V
1781495147	50 Pkt	0 Pkt	6 Pkt	-50 dBm	0.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)