OE9XKV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE9XKV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Eff1h*	RTemp*
1777202027	13.58 Volt	750 Pkt	80 Pcnt	33.5 °c
1777202025	13.58 Volt	750 Pkt	80 Pcnt	33.5 °c
1777201725	13.58 Volt	750 Pkt	80 Pcnt	33.5 °c
1777201425	13.58 Volt	750 Pkt	79 Pcnt	33.5 °c
1777201126	13.58 Volt	760 Pkt	79 Pcnt	33.5 °c
1777201125	13.58 Volt	760 Pkt	79 Pcnt	33.5 °c
1777200825	13.58 Volt	760 Pkt	78 Pcnt	33.5 °c
1777200525	13.58 Volt	740 Pkt	78 Pcnt	33.5 °c
1777200226	13.58 Volt	760 Pkt	78 Pcnt	33.5 °c
1777200225	13.58 Volt	760 Pkt	78 Pcnt	33.5 °c
1777199925	13.58 Volt	770 Pkt	79 Pcnt	33.5 °c
1777199625	13.58 Volt	770 Pkt	79 Pcnt	33.5 °c
1777199326	13.58 Volt	780 Pkt	80 Pcnt	33.5 °c
1777199325	13.58 Volt	780 Pkt	80 Pcnt	33.5 °c
1777199025	13.58 Volt	800 Pkt	80 Pcnt	33.5 °c
1777198725	13.58 Volt	820 Pkt	81 Pcnt	33.5 °c
1777198426	13.58 Volt	840 Pkt	82 Pcnt	33.5 °c
1777198425	13.58 Volt	840 Pkt	82 Pcnt	33.5 °c
1777198125	13.58 Volt	840 Pkt	82 Pcnt	33.5 °c
1777197825	13.58 Volt	850 Pkt	83 Pcnt	33.5 °c
1777197527	13.58 Volt	880 Pkt	84 Pcnt	33.5 °c
1777197525	13.58 Volt	880 Pkt	84 Pcnt	33.5 °c
1777197225	13.58 Volt	900 Pkt	84 Pcnt	33.5 °c
1777196925	13.58 Volt	910 Pkt	84 Pcnt	33.5 °c
1777196627	13.58 Volt	890 Pkt	84 Pcnt	33 °c

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

RTemp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)