HB9ZRH-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9ZRH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Pres*	Humi*
1777020888	25 deg.C	1020 mbar	35 Percen
1777020588	24.5 deg.C	1020 mbar	35 Percen
1777020288	24.5 deg.C	1020 mbar	35 Percen
1777019988	24.5 deg.C	1020 mbar	35 Percen
1777019688	25 deg.C	1020 mbar	35 Percen
1777019388	25 deg.C	1020 mbar	35 Percen
1777019088	25 deg.C	1020 mbar	35 Percen
1777018788	24.5 deg.C	1020 mbar	36 Percen
1777018488	24.5 deg.C	1020 mbar	36 Percen
1777018188	24.5 deg.C	1020 mbar	36 Percen
1777017888	24 deg.C	1020 mbar	36 Percen
1777017588	24 deg.C	1020 mbar	36 Percen
1777017288	24 deg.C	1020 mbar	36 Percen
1777016988	24 deg.C	1020 mbar	36 Percen
1777016688	23.5 deg.C	1020 mbar	37 Percen
1777016388	24 deg.C	1020 mbar	36 Percen
1777016088	23.5 deg.C	1020 mbar	37 Percen
1777015788	23.5 deg.C	1020 mbar	37 Percen
1777015488	23 deg.C	1020 mbar	37 Percen
1777015188	23 deg.C	1020 mbar	37 Percen
1777014889	23.5 deg.C	1020 mbar	37 Percen
1777014588	23.5 deg.C	1020 mbar	37 Percen
1777014288	23.5 deg.C	1020 mbar	37 Percen
1777013988	23.5 deg.C	1020 mbar	37 Percen
1777013688	23 deg.C	1020 mbar	37 Percen

*Used Equation Coefficients:

Temp: 0, 0.5, -40

Pres: 0, 1, 850

Humi: 0, 0.5, 0

xxx: 0, 1, 0

yyy: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)