TA2WI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2WI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1781402299	145 Pkt	1 Pkt	0 Pkt	-41 dBm	2.11 V
1781401366	173 Pkt	2 Pkt	0 Pkt	-41 dBm	2.09 V
1781400426	178 Pkt	1 Pkt	0 Pkt	-41 dBm	2.13 V
1781399486	160 Pkt	1 Pkt	0 Pkt	-41 dBm	1.93 V
1781398547	9 Pkt	0 Pkt	0 Pkt	-40 dBm	1.83 V
1781397429	170 Pkt	1 Pkt	0 Pkt	-41 dBm	1.76 V
1781396490	155 Pkt	1 Pkt	0 Pkt	-41 dBm	1.78 V
1781395658	169 Pkt	1 Pkt	0 Pkt	-41 dBm	1.74 V
1781394718	16 Pkt	0 Pkt	0 Pkt	-41 dBm	1.74 V
1781394366	161 Pkt	1 Pkt	0 Pkt	-41 dBm	1.72 V
1781393429	171 Pkt	1 Pkt	0 Pkt	-42 dBm	1.76 V
1781392488	171 Pkt	1 Pkt	0 Pkt	-41 dBm	1.64 V
1781391550	163 Pkt	1 Pkt	0 Pkt	-42 dBm	1.6 V
1781390611	158 Pkt	2 Pkt	0 Pkt	-41 dBm	1.54 V
1781389672	2 Pkt	0 Pkt	0 Pkt	-40 dBm	1.54 V
1781389130	83 Pkt	1 Pkt	0 Pkt	-41 dBm	1.37 V
1781388198	63 Pkt	1 Pkt	0 Pkt	-43 dBm	1.33 V
1781387271	62 Pkt	1 Pkt	0 Pkt	-42 dBm	1.17 V
1781386342	84 Pkt	1 Pkt	0 Pkt	-42 dBm	1.56 V
1781385411	183 Pkt	1 Pkt	0 Pkt	-42 dBm	1.19 V
1781384473	184 Pkt	2 Pkt	0 Pkt	-41 dBm	1.25 V
1781383527	96 Pkt	1 Pkt	0 Pkt	-42 dBm	1.33 V
1781382594	172 Pkt	1 Pkt	1 Pkt	-42 dBm	1.03 V
1781381652	180 Pkt	1 Pkt	0 Pkt	-41 dBm	0.82 V
1781380712	14 Pkt	1 Pkt	0 Pkt	-42 dBm	1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)