W8VFR-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8VFR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1773206907	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	7 count/10m
1773205707	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	7 count/10m
1773204507	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	8 count/10m
1773203307	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	8 count/10m
1773202107	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	6 count/10m
1773200907	0.03 Rx Erlang	0.01 Tx Erlang	32 count/10m	1 count/10m	8 count/10m
1773199707	0.02 Rx Erlang	0.01 Tx Erlang	24 count/10m	0 count/10m	7 count/10m
1773198507	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	0 count/10m	7 count/10m
1773197307	0.04 Rx Erlang	0.01 Tx Erlang	33 count/10m	0 count/10m	8 count/10m
1773196107	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	1 count/10m	8 count/10m
1773194907	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	0 count/10m	7 count/10m
1773193707	0.03 Rx Erlang	0.01 Tx Erlang	32 count/10m	0 count/10m	7 count/10m
1773192507	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	0 count/10m	8 count/10m
1773191307	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	8 count/10m
1773190107	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	0 count/10m	7 count/10m
1773188912	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	1 count/10m	7 count/10m
1773187707	0.03 Rx Erlang	0 Tx Erlang	26 count/10m	0 count/10m	5 count/10m
1773186507	0.03 Rx Erlang	0 Tx Erlang	23 count/10m	0 count/10m	4 count/10m
1773185307	0.03 Rx Erlang	0 Tx Erlang	27 count/10m	1 count/10m	4 count/10m
1773184107	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	1 count/10m	5 count/10m
1773182907	0.04 Rx Erlang	0 Tx Erlang	33 count/10m	0 count/10m	4 count/10m
1773181707	0.04 Rx Erlang	0 Tx Erlang	35 count/10m	1 count/10m	5 count/10m
1773180507	0.03 Rx Erlang	0.01 Tx Erlang	30 count/10m	0 count/10m	5 count/10m
1773179307	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	1 count/10m	5 count/10m
1773178107	0.03 Rx Erlang	0 Tx Erlang	27 count/10m	0 count/10m	4 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)