K5DLF-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K5DLF-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788575399	14.78 Volt	110 Pkt	10 Pkt	56 Pcnt
1788575399	14.78 Volt	110 Pkt	10 Pkt	56 Pcnt
1788575216	14.78 Volt	130 Pkt	10 Pkt	62 Pcnt
1788574799	14.78 Volt	130 Pkt	10 Pkt	62 Pcnt
1788574199	14.7 Volt	130 Pkt	10 Pkt	61 Pcnt
1788574199	14.7 Volt	130 Pkt	10 Pkt	61 Pcnt
1788573948	14.7 Volt	130 Pkt	10 Pkt	60 Pcnt
1788573947	14.7 Volt	130 Pkt	10 Pkt	60 Pcnt
1788573945	14.78 Volt	140 Pkt	10 Pkt	55 Pcnt
1788573599	14.7 Volt	130 Pkt	10 Pkt	60 Pcnt
1788572999	14.7 Volt	130 Pkt	10 Pkt	60 Pcnt
1788572399	14.78 Volt	140 Pkt	10 Pkt	55 Pcnt
1788571799	14.7 Volt	170 Pkt	10 Pkt	55 Pcnt
1788571799	14.7 Volt	170 Pkt	10 Pkt	55 Pcnt
1788571200	14.78 Volt	160 Pkt	10 Pkt	54 Pcnt
1788571199	14.78 Volt	160 Pkt	10 Pkt	54 Pcnt
1788570599	14.7 Volt	170 Pkt	10 Pkt	53 Pcnt
1788570599	14.7 Volt	170 Pkt	10 Pkt	53 Pcnt
1788569999	14.7 Volt	190 Pkt	20 Pkt	53 Pcnt
1788569999	14.7 Volt	190 Pkt	20 Pkt	53 Pcnt
1788569399	14.78 Volt	190 Pkt	20 Pkt	49 Pcnt
1788569399	14.78 Volt	190 Pkt	20 Pkt	49 Pcnt
1788568799	14.7 Volt	220 Pkt	20 Pkt	51 Pcnt
1788568799	14.7 Volt	220 Pkt	20 Pkt	51 Pcnt
1788568200	14.7 Volt	240 Pkt	30 Pkt	53 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)