ED1ZAR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED1ZAR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Fuente*	Fuente*	Batt*	Batt*	T.EXT*
1784699041	13.9 Volt	1.56 Amp	-0.2 Amp	13.2 Volt	-64 C
1784698741	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784698442	13.9 Volt	2.34 Amp	-0.2 Amp	13.2 Volt	-64 C
1784698441	13.9 Volt	2.34 Amp	-0.2 Amp	13.2 Volt	-64 C
1784698141	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784697841	13.9 Volt	1.56 Amp	-0.2 Amp	13.2 Volt	-64 C
1784697541	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784697241	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784696941	13.9 Volt	1.56 Amp	-0.2 Amp	13.2 Volt	-64 C
1784696642	13.9 Volt	2.15 Amp	-0.2 Amp	13.2 Volt	-64 C
1784696641	13.9 Volt	2.15 Amp	-0.2 Amp	13.2 Volt	-64 C
1784696341	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784696041	13.9 Volt	1.56 Amp	-0.2 Amp	13.2 Volt	-64 C
1784695741	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784695441	13.9 Volt	1.95 Amp	-0.2 Amp	13.2 Volt	-64 C
1784695141	13.9 Volt	1.95 Amp	-0.2 Amp	13.2 Volt	-64 C
1784694842	13.9 Volt	2.34 Amp	-0.2 Amp	13.2 Volt	-64 C
1784694841	13.9 Volt	2.34 Amp	-0.2 Amp	13.2 Volt	-64 C
1784694541	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784694241	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784693941	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784693641	13.9 Volt	1.76 Amp	-0.2 Amp	13.2 Volt	-64 C
1784693341	13.9 Volt	1.95 Amp	-0.2 Amp	13.2 Volt	-64 C
1784693043	13.9 Volt	2.15 Amp	-0.2 Amp	13.2 Volt	-64 C
1784693041	13.9 Volt	2.15 Amp	-0.2 Amp	13.2 Volt	-64 C

*Used Equation Coefficients:

Fuente: 0, 0.1, 0

Fuente: 0, 0.1953, -24.8031

Batt: 0, 0.1953, -24.8031

Batt: 0, 0.1, 0

T.EXT: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)