SP2SGK-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2SGK-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1765515605	35 Deg.C	3 %
1765515002	35 Deg.C	3 %
1765514405	35 Deg.C	3 %
1765513802	35 Deg.C	3 %
1765513205	35 Deg.C	3 %
1765512604	35 Deg.C	3 %
1765512001	35 Deg.C	3 %
1765511404	36 Deg.C	3 %
1765510802	35 Deg.C	3 %
1765510205	38 Deg.C	3 %
1765509601	37 Deg.C	3 %
1765509005	38 Deg.C	3 %
1765508402	39 Deg.C	3 %
1765507802	38 Deg.C	3 %
1765507205	39 Deg.C	3 %
1765506602	38 Deg.C	3 %
1765506005	38 Deg.C	3 %
1765505402	38 Deg.C	3 %
1765504805	38 Deg.C	3 %
1765504201	38 Deg.C	3 %
1765503602	38 Deg.C	3 %
1765502402	38 Deg.C	3 %
1765501804	38 Deg.C	3 %
1765500002	38 Deg.C	3 %
1765499401	38 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)