WA6TOW-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA6TOW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1772720855	14.85 Volt	590 Pkt	210 Pkt	76 Pcnt	66.2 F
1772719955	14.78 Volt	590 Pkt	220 Pkt	79 Pcnt	66.2 F
1772719055	14.78 Volt	600 Pkt	220 Pkt	79 Pcnt	66.2 F
1772718155	14.85 Volt	570 Pkt	200 Pkt	79 Pcnt	66.2 F
1772717255	14.78 Volt	560 Pkt	200 Pkt	79 Pcnt	66.2 F
1772716355	14.78 Volt	550 Pkt	190 Pkt	77 Pcnt	66.2 F
1772714555	14.78 Volt	550 Pkt	200 Pkt	77 Pcnt	67.1 F
1772713655	14.85 Volt	540 Pkt	200 Pkt	77 Pcnt	67.1 F
1772711856	14.78 Volt	570 Pkt	190 Pkt	80 Pcnt	67.1 F
1772710956	14.78 Volt	550 Pkt	200 Pkt	81 Pcnt	67.1 F
1772710056	14.78 Volt	570 Pkt	200 Pkt	82 Pcnt	67.1 F
1772709156	14.85 Volt	570 Pkt	210 Pkt	80 Pcnt	67.1 F
1772708256	14.78 Volt	570 Pkt	220 Pkt	79 Pcnt	67.1 F
1772707356	14.78 Volt	600 Pkt	220 Pkt	78 Pcnt	67.1 F
1772706456	14.78 Volt	590 Pkt	210 Pkt	76 Pcnt	67.1 F
1772705556	14.78 Volt	580 Pkt	200 Pkt	78 Pcnt	67.1 F
1772704656	14.78 Volt	560 Pkt	200 Pkt	78 Pcnt	67.1 F
1772703756	14.85 Volt	560 Pkt	200 Pkt	78 Pcnt	67.1 F
1772702856	14.78 Volt	560 Pkt	190 Pkt	78 Pcnt	67.1 F
1772701956	14.78 Volt	560 Pkt	200 Pkt	79 Pcnt	67.1 F
1772701056	14.85 Volt	570 Pkt	200 Pkt	80 Pcnt	67.1 F
1772700156	14.78 Volt	570 Pkt	200 Pkt	82 Pcnt	68 F
1772699256	14.78 Volt	570 Pkt	200 Pkt	83 Pcnt	68 F
1772698356	14.78 Volt	570 Pkt	210 Pkt	82 Pcnt	68 F
1772697456	14.78 Volt	580 Pkt	210 Pkt	81 Pcnt	68 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)