N9CVR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N9CVR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761545184	0.04 Rx Erlang	0.01 Tx Erlang	49 count/10m	0 count/10m	3 count/10m
1761543984	0.06 Rx Erlang	0.01 Tx Erlang	54 count/10m	0 count/10m	5 count/10m
1761542792	0.05 Rx Erlang	0.01 Tx Erlang	52 count/10m	0 count/10m	4 count/10m
1761541584	0.05 Rx Erlang	0 Tx Erlang	46 count/10m	0 count/10m	3 count/10m
1761540384	0.04 Rx Erlang	0 Tx Erlang	46 count/10m	0 count/10m	2 count/10m
1761539184	0.05 Rx Erlang	0 Tx Erlang	52 count/10m	1 count/10m	4 count/10m
1761537984	0.06 Rx Erlang	0 Tx Erlang	58 count/10m	1 count/10m	4 count/10m
1761536784	0.06 Rx Erlang	0 Tx Erlang	65 count/10m	0 count/10m	5 count/10m
1761535584	0.06 Rx Erlang	0.01 Tx Erlang	58 count/10m	7 count/10m	5 count/10m
1761534384	0.04 Rx Erlang	0.01 Tx Erlang	43 count/10m	0 count/10m	3 count/10m
1761533184	0.03 Rx Erlang	0.01 Tx Erlang	32 count/10m	0 count/10m	5 count/10m
1761531984	0.06 Rx Erlang	0.01 Tx Erlang	58 count/10m	1 count/10m	6 count/10m
1761530784	0.05 Rx Erlang	0 Tx Erlang	43 count/10m	0 count/10m	4 count/10m
1761529584	0.04 Rx Erlang	0.01 Tx Erlang	41 count/10m	0 count/10m	4 count/10m
1761528384	0.04 Rx Erlang	0.01 Tx Erlang	37 count/10m	1 count/10m	9 count/10m
1761527184	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	1 count/10m	4 count/10m
1761525984	0.05 Rx Erlang	0.01 Tx Erlang	45 count/10m	9 count/10m	6 count/10m
1761524784	0.04 Rx Erlang	0 Tx Erlang	39 count/10m	0 count/10m	5 count/10m
1761521184	0.02 Rx Erlang	0 Tx Erlang	30 count/10m	1 count/10m	2 count/10m
1761517584	0.06 Rx Erlang	0.01 Tx Erlang	63 count/10m	0 count/10m	6 count/10m
1761516384	0.04 Rx Erlang	0.01 Tx Erlang	49 count/10m	0 count/10m	8 count/10m
1761515184	0.05 Rx Erlang	0.01 Tx Erlang	53 count/10m	0 count/10m	8 count/10m
1761513984	0.04 Rx Erlang	0.01 Tx Erlang	42 count/10m	0 count/10m	6 count/10m
1761511584	0.03 Rx Erlang	0.01 Tx Erlang	34 count/10m	0 count/10m	10 count/10m
1761510384	0.05 Rx Erlang	0.01 Tx Erlang	48 count/10m	0 count/10m	10 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)