IZ5OQO-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ5OQO-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784667468	13.88 Volt	410 Pkt	290 Pkt	69 Pcnt
1784667169	13.88 Volt	410 Pkt	280 Pkt	71 Pcnt
1784667168	13.88 Volt	410 Pkt	280 Pkt	71 Pcnt
1784666868	13.88 Volt	420 Pkt	280 Pkt	70 Pcnt
1784666569	13.88 Volt	420 Pkt	290 Pkt	71 Pcnt
1784666568	13.88 Volt	420 Pkt	290 Pkt	71 Pcnt
1784666268	13.88 Volt	430 Pkt	290 Pkt	71 Pcnt
1784665969	13.88 Volt	440 Pkt	290 Pkt	71 Pcnt
1784665968	13.88 Volt	440 Pkt	290 Pkt	71 Pcnt
1784665668	13.88 Volt	430 Pkt	300 Pkt	71 Pcnt
1784665369	13.88 Volt	440 Pkt	310 Pkt	71 Pcnt
1784665368	13.88 Volt	440 Pkt	310 Pkt	71 Pcnt
1784665068	13.88 Volt	450 Pkt	310 Pkt	71 Pcnt
1784664770	13.88 Volt	430 Pkt	300 Pkt	70 Pcnt
1784664768	13.88 Volt	430 Pkt	300 Pkt	70 Pcnt
1784664468	13.88 Volt	430 Pkt	290 Pkt	71 Pcnt
1784664169	13.88 Volt	410 Pkt	270 Pkt	70 Pcnt
1784664168	13.88 Volt	410 Pkt	270 Pkt	70 Pcnt
1784663868	13.88 Volt	410 Pkt	270 Pkt	70 Pcnt
1784663569	13.88 Volt	410 Pkt	270 Pkt	69 Pcnt
1784663568	13.88 Volt	410 Pkt	270 Pkt	69 Pcnt
1784663268	13.88 Volt	400 Pkt	270 Pkt	69 Pcnt
1784662969	13.88 Volt	390 Pkt	270 Pkt	68 Pcnt
1784662968	13.88 Volt	390 Pkt	270 Pkt	68 Pcnt
1784662668	13.88 Volt	370 Pkt	260 Pkt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)