LU2EP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2EP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1780885533	24 Pkt	2 Pkt	31 dBm	12.57 V
1780883647	41 Pkt	0 Pkt	31 dBm	12.57 V
1780882564	33 Pkt	0 Pkt	31 dBm	12.57 V
1780880676	34 Pkt	1 Pkt	31 dBm	12.57 V
1780879592	33 Pkt	2 Pkt	31 dBm	12.57 V
1780877705	32 Pkt	0 Pkt	31 dBm	12.57 V
1780876621	42 Pkt	0 Pkt	31 dBm	12.57 V
1780874734	27 Pkt	0 Pkt	31 dBm	12.57 V
1780873653	44 Pkt	4 Pkt	31 dBm	12.57 V
1780871764	31 Pkt	5 Pkt	31 dBm	12.57 V
1780867711	30 Pkt	4 Pkt	31 dBm	12.57 V
1780865827	22 Pkt	2 Pkt	31 dBm	12.57 V
1780864750	35 Pkt	2 Pkt	31 dBm	12.57 V
1780862861	32 Pkt	2 Pkt	31 dBm	12.57 V
1780861779	33 Pkt	4 Pkt	31 dBm	12.55 V
1780859888	43 Pkt	2 Pkt	31 dBm	12.57 V
1780858803	41 Pkt	4 Pkt	31 dBm	12.57 V
1780856915	37 Pkt	1 Pkt	31 dBm	12.57 V
1780855836	50 Pkt	3 Pkt	31 dBm	12.59 V
1780853947	32 Pkt	3 Pkt	31 dBm	12.57 V
1780852864	27 Pkt	4 Pkt	31 dBm	12.57 V
1780850980	50 Pkt	3 Pkt	31 dBm	12.57 V
1780849892	23 Pkt	0 Pkt	31 dBm	12.57 V
1780848004	27 Pkt	6 Pkt	31 dBm	12.57 V
1780846921	32 Pkt	1 Pkt	31 dBm	12.57 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)