N1HQ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1HQ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761521651	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	3 count/10m	8 count/10m
1761520451	0.02 Rx Erlang	0.01 Tx Erlang	15 count/10m	5 count/10m	9 count/10m
1761519251	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	5 count/10m	9 count/10m
1761518055	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	6 count/10m	8 count/10m
1761516851	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	5 count/10m	10 count/10m
1761515651	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	5 count/10m	9 count/10m
1761514451	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	5 count/10m	11 count/10m
1761513251	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	5 count/10m	10 count/10m
1761512051	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	4 count/10m	8 count/10m
1761510851	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	4 count/10m	9 count/10m
1761509651	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	5 count/10m	10 count/10m
1761508451	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	5 count/10m	10 count/10m
1761507251	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	4 count/10m	10 count/10m
1761506051	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	5 count/10m	11 count/10m
1761504851	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	5 count/10m	10 count/10m
1761503651	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	5 count/10m	10 count/10m
1761502451	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	5 count/10m	11 count/10m
1761501251	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	4 count/10m	9 count/10m
1761500051	0.02 Rx Erlang	0.02 Tx Erlang	11 count/10m	5 count/10m	11 count/10m
1761498851	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	5 count/10m	10 count/10m
1761497651	0.02 Rx Erlang	0.01 Tx Erlang	11 count/10m	5 count/10m	10 count/10m
1761496451	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	3 count/10m	8 count/10m
1761495251	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	5 count/10m	9 count/10m
1761494051	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	4 count/10m	9 count/10m
1761492851	0.02 Rx Erlang	0.01 Tx Erlang	11 count/10m	4 count/10m	10 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)