SR2T Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2T. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1776642005	36 Deg.C	1 %
1776641402	35 Deg.C	1 %
1776640805	36 Deg.C	1 %
1776640202	36 Deg.C	1 %
1776639605	35 Deg.C	1 %
1776639001	35 Deg.C	1 %
1776638401	36 Deg.C	1 %
1776637805	35 Deg.C	1 %
1776637207	35 Deg.C	1 %
1776636605	34 Deg.C	1 %
1776636002	35 Deg.C	1 %
1776635405	36 Deg.C	1 %
1776634802	34 Deg.C	1 %
1776634202	35 Deg.C	1 %
1776633605	34 Deg.C	1 %
1776633001	36 Deg.C	1 %
1776632405	35 Deg.C	1 %
1776631802	36 Deg.C	1 %
1776631205	36 Deg.C	1 %
1776630601	35 Deg.C	1 %
1776630005	35 Deg.C	1 %
1776629402	36 Deg.C	1 %
1776628805	37 Deg.C	1 %
1776628202	35 Deg.C	1 %
1776627605	35 Deg.C	1 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)