PD1AQM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PD1AQM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1784722557	551 Count	0 Count	0 Count	0 VDC	0 VDC
1784720753	550 Count	0 Count	0 Count	0 VDC	0 VDC
1784718950	549 Count	0 Count	0 Count	0 VDC	0 VDC
1784717146	548 Count	0 Count	0 Count	0 VDC	0 VDC
1784715342	547 Count	0 Count	0 Count	0 VDC	0 VDC
1784713539	546 Count	0 Count	0 Count	0 VDC	0 VDC
1784711789	545 Count	0 Count	0 Count	0 VDC	0 VDC
1784709975	544 Count	0 Count	0 Count	0 VDC	0 VDC
1784708171	543 Count	0 Count	0 Count	0 VDC	0 VDC
1784706367	542 Count	0 Count	0 Count	0 VDC	0 VDC
1784704564	541 Count	0 Count	0 Count	0 VDC	0 VDC
1784702760	540 Count	0 Count	0 Count	0 VDC	0 VDC
1784700956	539 Count	0 Count	0 Count	0 VDC	0 VDC
1784699152	538 Count	0 Count	0 Count	0 VDC	0 VDC
1784697349	537 Count	0 Count	0 Count	0 VDC	0 VDC
1784695545	536 Count	0 Count	0 Count	0 VDC	0 VDC
1784693742	535 Count	0 Count	0 Count	0 VDC	0 VDC
1784691938	534 Count	0 Count	0 Count	0 VDC	0 VDC
1784668577	521 Count	0 Count	0 Count	0 VDC	0 VDC
1784666774	520 Count	0 Count	0 Count	0 VDC	0 VDC
1784664970	519 Count	0 Count	0 Count	0 VDC	0 VDC
1784663166	518 Count	0 Count	0 Count	0 VDC	0 VDC
1784661363	517 Count	0 Count	0 Count	0 VDC	0 VDC
1784659559	516 Count	0 Count	0 Count	0 VDC	0 VDC
1784657756	515 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)