SR3NPB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR3NPB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784692665	13.05 Volt	710 Pkt	190 Pkt	74 Pcnt
1784692365	13.05 Volt	710 Pkt	190 Pkt	75 Pcnt
1784692065	12.98 Volt	720 Pkt	200 Pkt	76 Pcnt
1784691765	12.98 Volt	690 Pkt	190 Pkt	75 Pcnt
1784691465	13.05 Volt	690 Pkt	190 Pkt	76 Pcnt
1784691165	12.83 Volt	670 Pkt	180 Pkt	75 Pcnt
1784690865	13.05 Volt	650 Pkt	170 Pkt	74 Pcnt
1784690565	13.05 Volt	630 Pkt	160 Pkt	74 Pcnt
1784690265	13.05 Volt	620 Pkt	160 Pkt	74 Pcnt
1784689965	12.83 Volt	590 Pkt	160 Pkt	76 Pcnt
1784689665	13.05 Volt	570 Pkt	150 Pkt	76 Pcnt
1784689365	13.05 Volt	550 Pkt	140 Pkt	77 Pcnt
1784689065	12.75 Volt	530 Pkt	130 Pkt	77 Pcnt
1784688765	13.05 Volt	500 Pkt	120 Pkt	76 Pcnt
1784688465	13.05 Volt	500 Pkt	120 Pkt	76 Pcnt
1784688165	13.05 Volt	490 Pkt	120 Pkt	77 Pcnt
1784687865	13.05 Volt	480 Pkt	120 Pkt	76 Pcnt
1784687565	13.05 Volt	470 Pkt	120 Pkt	77 Pcnt
1784687265	13.05 Volt	470 Pkt	120 Pkt	78 Pcnt
1784686965	13.05 Volt	460 Pkt	120 Pkt	79 Pcnt
1784686665	13.05 Volt	470 Pkt	120 Pkt	79 Pcnt
1784686365	13.05 Volt	450 Pkt	120 Pkt	78 Pcnt
1784686065	12.98 Volt	450 Pkt	120 Pkt	78 Pcnt
1784685765	12.98 Volt	420 Pkt	120 Pkt	76 Pcnt
1784685466	13.05 Volt	410 Pkt	120 Pkt	74 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)