SP6VXU-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6VXU-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1773265205	41 Deg.C	3 %
1773264601	40 Deg.C	3 %
1773264005	40 Deg.C	3 %
1773263402	41 Deg.C	3 %
1773262805	41 Deg.C	3 %
1773262202	41 Deg.C	3 %
1773261601	40 Deg.C	3 %
1773261005	41 Deg.C	3 %
1773260402	40 Deg.C	3 %
1773259805	41 Deg.C	3 %
1773259201	41 Deg.C	3 %
1773258605	40 Deg.C	3 %
1773258002	40 Deg.C	3 %
1773257402	40 Deg.C	3 %
1773256805	41 Deg.C	3 %
1773256201	41 Deg.C	3 %
1773255605	41 Deg.C	3 %
1773255002	41 Deg.C	3 %
1773254405	41 Deg.C	3 %
1773253801	41 Deg.C	3 %
1773253202	41 Deg.C	3 %
1773252605	40 Deg.C	3 %
1773252001	41 Deg.C	3 %
1773251405	41 Deg.C	3 %
1773250802	40 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)