CHKWLA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CHKWLA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1789947750	13.88 Volt	320 Pkt	50 Pkt	72 Pcnt
1789945950	13.88 Volt	330 Pkt	50 Pkt	74 Pcnt
1789944150	13.95 Volt	360 Pkt	50 Pkt	73 Pcnt
1789942350	13.88 Volt	410 Pkt	50 Pkt	73 Pcnt
1789940550	13.88 Volt	460 Pkt	40 Pkt	72 Pcnt
1789938750	13.88 Volt	380 Pkt	50 Pkt	76 Pcnt
1789936950	13.88 Volt	270 Pkt	40 Pkt	78 Pcnt
1789935150	13.88 Volt	280 Pkt	50 Pkt	73 Pcnt
1789933350	13.88 Volt	330 Pkt	70 Pkt	72 Pcnt
1789931550	13.88 Volt	310 Pkt	70 Pkt	68 Pcnt
1789929750	13.88 Volt	430 Pkt	120 Pkt	68 Pcnt
1789927951	13.88 Volt	450 Pkt	110 Pkt	68 Pcnt
1789926151	13.88 Volt	420 Pkt	110 Pkt	66 Pcnt
1789924351	13.88 Volt	480 Pkt	170 Pkt	71 Pcnt
1789922551	13.95 Volt	430 Pkt	180 Pkt	79 Pcnt
1789920751	13.88 Volt	350 Pkt	110 Pkt	66 Pcnt
1789918951	13.95 Volt	280 Pkt	40 Pkt	49 Pcnt
1789917151	13.95 Volt	260 Pkt	30 Pkt	52 Pcnt
1789915351	13.95 Volt	250 Pkt	30 Pkt	58 Pcnt
1789913551	13.95 Volt	260 Pkt	30 Pkt	62 Pcnt
1789911751	13.95 Volt	270 Pkt	40 Pkt	64 Pcnt
1789909951	13.95 Volt	260 Pkt	40 Pkt	63 Pcnt
1789908151	13.95 Volt	260 Pkt	40 Pkt	60 Pcnt
1789906351	13.95 Volt	250 Pkt	30 Pkt	53 Pcnt
1789904551	13.95 Volt	270 Pkt	40 Pkt	49 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)