XE1CRG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE1CRG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1776701992	13.58 Volt	100 Pkt	30 Pkt	68 Pcnt	15.04 C
1776701692	13.58 Volt	120 Pkt	30 Pkt	69 Pcnt	15.04 C
1776701392	13.58 Volt	120 Pkt	30 Pkt	70 Pcnt	14.09 C
1776701092	13.58 Volt	120 Pkt	30 Pkt	72 Pcnt	13.61 C
1776700792	13.5 Volt	120 Pkt	30 Pkt	72 Pcnt	13.13 C
1776700492	13.28 Volt	130 Pkt	30 Pkt	71 Pcnt	13.13 C
1776700192	13.35 Volt	130 Pkt	30 Pkt	74 Pcnt	13.13 C
1776699892	13.58 Volt	130 Pkt	30 Pkt	75 Pcnt	12.66 C
1776699592	13.58 Volt	140 Pkt	30 Pkt	75 Pcnt	12.66 C
1776699292	13.58 Volt	130 Pkt	20 Pkt	74 Pcnt	12.19 C
1776698992	13.58 Volt	130 Pkt	20 Pkt	75 Pcnt	12.19 C
1776698692	13.58 Volt	140 Pkt	20 Pkt	75 Pcnt	12.19 C
1776698392	13.5 Volt	140 Pkt	20 Pkt	76 Pcnt	12.66 C
1776698092	13.5 Volt	130 Pkt	20 Pkt	73 Pcnt	13.13 C
1776697792	13.5 Volt	130 Pkt	20 Pkt	72 Pcnt	13.13 C
1776697492	13.28 Volt	130 Pkt	20 Pkt	74 Pcnt	13.13 C
1776697192	13.28 Volt	140 Pkt	20 Pkt	75 Pcnt	12.19 C
1776696892	13.28 Volt	140 Pkt	20 Pkt	77 Pcnt	12.19 C
1776696592	13.35 Volt	130 Pkt	20 Pkt	78 Pcnt	12.66 C
1776696292	13.58 Volt	140 Pkt	20 Pkt	78 Pcnt	12.66 C
1776695992	13.5 Volt	130 Pkt	20 Pkt	79 Pcnt	12.19 C
1776695692	13.58 Volt	130 Pkt	20 Pkt	76 Pcnt	12.19 C
1776695392	13.58 Volt	150 Pkt	20 Pkt	76 Pcnt	12.66 C
1776695092	13.58 Volt	150 Pkt	20 Pkt	77 Pcnt	12.66 C
1776694792	13.58 Volt	150 Pkt	20 Pkt	79 Pcnt	11.71 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0.0005247, 0.3137172, -47.6223

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)