ED4ZAI-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED4ZAI-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1784798349	14.03 Volt	190 Pkt	90 Pkt	84 Pcnt	30 C
1784796549	13.65 Volt	210 Pkt	90 Pkt	85 Pcnt	29.5 C
1784794749	13.43 Volt	250 Pkt	100 Pkt	86 Pcnt	29.5 C
1784792949	13.13 Volt	210 Pkt	90 Pkt	84 Pcnt	30 C
1784791149	12.68 Volt	190 Pkt	90 Pkt	86 Pcnt	30 C
1784789349	12.38 Volt	240 Pkt	100 Pkt	87 Pcnt	30 C
1784787549	12.38 Volt	230 Pkt	100 Pkt	86 Pcnt	30.5 C
1784785749	12.38 Volt	150 Pkt	80 Pkt	76 Pcnt	30.5 C
1784783949	12.38 Volt	130 Pkt	70 Pkt	77 Pcnt	31 C
1784782149	12.38 Volt	200 Pkt	80 Pkt	94 Pcnt	31.5 C
1784780349	12.38 Volt	210 Pkt	90 Pkt	94 Pcnt	31.5 C
1784778549	12.45 Volt	160 Pkt	70 Pkt	91 Pcnt	32 C
1784776749	12.45 Volt	120 Pkt	70 Pkt	95 Pcnt	32.5 C
1784774949	12.53 Volt	130 Pkt	60 Pkt	95 Pcnt	33 C
1784773149	12.53 Volt	130 Pkt	60 Pkt	97 Pcnt	33.5 C
1784771349	12.53 Volt	130 Pkt	70 Pkt	94 Pcnt	33.5 C
1784769549	12.53 Volt	120 Pkt	70 Pkt	90 Pcnt	34 C
1784767750	12.53 Volt	120 Pkt	60 Pkt	90 Pcnt	34.5 C
1784765949	12.53 Volt	170 Pkt	100 Pkt	90 Pcnt	34.5 C
1784764149	12.53 Volt	240 Pkt	140 Pkt	94 Pcnt	35 C
1784762350	12.53 Volt	260 Pkt	110 Pkt	97 Pcnt	35.5 C
1784760550	12.45 Volt	300 Pkt	80 Pkt	94 Pcnt	35.5 C
1784758750	12.45 Volt	310 Pkt	70 Pkt	93 Pcnt	36 C
1784756950	12.53 Volt	310 Pkt	70 Pkt	90 Pcnt	36 C
1784755158	12.53 Volt	300 Pkt	60 Pkt	87 Pcnt	36 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)