TA3TX-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3TX-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1765498424	25 Pkt	1 Pkt	-23 dBm	21 V
1765498424	25 Pkt	1 Pkt	-21 dBm	21 V
1765497558	21 Pkt	1 Pkt	-20 dBm	21 V
1765497558	21 Pkt	1 Pkt	-21 dBm	21 V
1765496691	16 Pkt	3 Pkt	-22 dBm	21 V
1765495825	18 Pkt	2 Pkt	-22 dBm	21 V
1765494957	21 Pkt	0 Pkt	-22 dBm	21 V
1765494091	18 Pkt	1 Pkt	-22 dBm	21 V
1765493224	13 Pkt	2 Pkt	-22 dBm	21 V
1765492360	13 Pkt	1 Pkt	-22 dBm	21 V
1765492360	13 Pkt	1 Pkt	-23 dBm	21 V
1765491495	9 Pkt	1 Pkt	-22 dBm	21 V
1765490632	8 Pkt	1 Pkt	-22 dBm	21 V
1765489767	15 Pkt	6 Pkt	-22 dBm	21 V
1765488899	22 Pkt	1 Pkt	-21 dBm	21 V
1765488033	15 Pkt	1 Pkt	-22 dBm	21 V
1765488033	15 Pkt	1 Pkt	-20 dBm	21 V
1765487166	21 Pkt	1 Pkt	-21 dBm	21 V
1765486297	21 Pkt	1 Pkt	-23 dBm	21 V
1765485428	2 Pkt	0 Pkt	-21 dBm	21 V
1765484914	20 Pkt	0 Pkt	-21 dBm	21 V
1765484047	22 Pkt	0 Pkt	-21 dBm	21 V
1765483181	11 Pkt	1 Pkt	-21 dBm	21 V
1765482316	18 Pkt	1 Pkt	-21 dBm	21 V
1765481451	17 Pkt	1 Pkt	-22 dBm	21 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)