IW1QAF-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW1QAF-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*
1753631311	69 Pkt/10m	56 Pkt/10m	4.9 Volt
1753630107	51 Pkt/10m	45 Pkt/10m	4.9 Volt
1753628907	50 Pkt/10m	46 Pkt/10m	4.92 Volt
1753627694	52 Pkt/10m	39 Pkt/10m	4.92 Volt
1753626491	64 Pkt/10m	57 Pkt/10m	4.9 Volt
1753624082	50 Pkt/10m	42 Pkt/10m	4.92 Volt
1753621674	56 Pkt/10m	33 Pkt/10m	4.9 Volt
1753620470	48 Pkt/10m	35 Pkt/10m	4.92 Volt
1753619266	61 Pkt/10m	40 Pkt/10m	4.9 Volt
1753618062	55 Pkt/10m	43 Pkt/10m	4.9 Volt
1753616858	71 Pkt/10m	61 Pkt/10m	4.92 Volt
1753615654	54 Pkt/10m	43 Pkt/10m	4.92 Volt
1753614450	66 Pkt/10m	53 Pkt/10m	4.92 Volt
1753613246	60 Pkt/10m	51 Pkt/10m	4.92 Volt
1753610838	64 Pkt/10m	52 Pkt/10m	4.92 Volt
1753609634	90 Pkt/10m	81 Pkt/10m	4.92 Volt
1753608430	54 Pkt/10m	43 Pkt/10m	4.92 Volt
1753607226	67 Pkt/10m	54 Pkt/10m	4.9 Volt
1753606022	55 Pkt/10m	48 Pkt/10m	4.9 Volt
1753604819	62 Pkt/10m	48 Pkt/10m	4.92 Volt
1753603614	44 Pkt/10m	33 Pkt/10m	4.9 Volt
1753602410	73 Pkt/10m	68 Pkt/10m	4.92 Volt
1753601206	59 Pkt/10m	42 Pkt/10m	4.9 Volt
1753600002	72 Pkt/10m	62 Pkt/10m	4.9 Volt
1753598798	45 Pkt/10m	38 Pkt/10m	4.9 Volt

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)