KC3ARY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC3ARY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery Voltage*	Battery Current*	Load Current*	Solar Voltage*	Solar Current*
1757470832	12.52 V	293 mA	-267 mA	0 V	0 mA
1757470234	12.61 V	286 mA	-261 mA	0 V	0 mA
1757469634	12.66 V	291 mA	-266 mA	0 V	0 mA
1757469034	12.68 V	288 mA	-263 mA	0 V	0 mA
1757468434	12.69 V	293 mA	-266 mA	0 V	0 mA
1757467834	12.7 V	304 mA	-277 mA	0 V	0 mA
1757467232	12.71 V	299 mA	-274 mA	0 V	0 mA
1757466634	12.72 V	308 mA	-284 mA	0.01 V	0 mA
1757466034	12.72 V	325 mA	-302 mA	0.02 V	0 mA
1757465434	12.74 V	289 mA	-264 mA	0.06 V	0 mA
1757464834	12.75 V	292 mA	-267 mA	0.15 V	0 mA
1757464234	12.75 V	302 mA	-277 mA	0.41 V	0 mA
1757463632	12.76 V	298 mA	-273 mA	1.11 V	0 mA
1757463034	12.76 V	291 mA	-267 mA	2.84 V	1 mA
1757462434	12.77 V	297 mA	-274 mA	6.4 V	3 mA
1757461834	12.77 V	284 mA	-265 mA	10.52 V	7 mA
1757461234	12.79 V	278 mA	-270 mA	12.65 V	19 mA
1757460638	12.81 V	262 mA	-282 mA	13.43 V	50 mA
1757460032	12.87 V	201 mA	-272 mA	14.11 V	104 mA
1757459435	12.98 V	132 mA	-270 mA	14.3 V	165 mA
1757458835	13.14 V	71 mA	-281 mA	14.55 V	234 mA
1757458235	13.3 V	25 mA	-278 mA	14.79 V	275 mA
1757457635	13.45 V	-2 mA	-268 mA	14.94 V	290 mA
1757457035	13.56 V	-21 mA	-274 mA	15.14 V	312 mA
1757456433	13.7 V	-36 mA	-266 mA	15.51 V	316 mA

*Used Equation Coefficients:

Battery Voltage: 0, 0.01, 0

Battery Current: 0, 1, -4096

Load Current: 0, 1, -4096

Solar Voltage: 0, 0.01, 0

Solar Current: 0, 1, -4096

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)