HG2PTH-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HG2PTH-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784673129	12.23 Volt	550 Pkt	50 Pkt	66 Pcnt
1784673128	12.23 Volt	550 Pkt	50 Pkt	66 Pcnt
1784672828	12.23 Volt	540 Pkt	40 Pkt	66 Pcnt
1784672529	12.23 Volt	540 Pkt	40 Pkt	65 Pcnt
1784672528	12.23 Volt	540 Pkt	40 Pkt	65 Pcnt
1784672228	12.23 Volt	540 Pkt	40 Pkt	64 Pcnt
1784671929	12.23 Volt	540 Pkt	50 Pkt	64 Pcnt
1784671928	12.23 Volt	540 Pkt	50 Pkt	64 Pcnt
1784671628	12.23 Volt	540 Pkt	50 Pkt	64 Pcnt
1784671329	12.23 Volt	540 Pkt	50 Pkt	64 Pcnt
1784671328	12.23 Volt	540 Pkt	50 Pkt	64 Pcnt
1784671029	12.23 Volt	540 Pkt	50 Pkt	63 Pcnt
1784670729	12.23 Volt	540 Pkt	50 Pkt	63 Pcnt
1784670728	12.23 Volt	540 Pkt	50 Pkt	63 Pcnt
1784670428	12.23 Volt	530 Pkt	50 Pkt	62 Pcnt
1784670129	12.23 Volt	510 Pkt	50 Pkt	61 Pcnt
1784670129	12.23 Volt	510 Pkt	50 Pkt	61 Pcnt
1784669829	12.23 Volt	480 Pkt	40 Pkt	59 Pcnt
1784669561	12.23 Volt	480 Pkt	40 Pkt	59 Pcnt
1784669529	12.23 Volt	480 Pkt	40 Pkt	59 Pcnt
1784669529	12.23 Volt	480 Pkt	40 Pkt	59 Pcnt
1784669229	12.23 Volt	470 Pkt	40 Pkt	58 Pcnt
1784668929	12.23 Volt	470 Pkt	40 Pkt	59 Pcnt
1784668929	12.23 Volt	470 Pkt	40 Pkt	59 Pcnt
1784668629	12.23 Volt	460 Pkt	40 Pkt	60 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)