TA5LVC-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA5LVC-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPackets*	TxPackets*	RSSI*	Voltage*
1784705980	89 Pkts	87 Pkts	-31 dBm	3.3 V
1784705080	76 Pkts	75 Pkts	-31 dBm	3.3 V
1784704180	52 Pkts	58 Pkts	-32 dBm	3.3 V
1784703280	37 Pkts	45 Pkts	-31 dBm	3.3 V
1784702380	30 Pkts	37 Pkts	-31 dBm	3.3 V
1784701480	21 Pkts	27 Pkts	-32 dBm	3.3 V
1784700580	14 Pkts	20 Pkts	-32 dBm	3.3 V
1784699680	10 Pkts	14 Pkts	-34 dBm	3.3 V
1784698780	0 Pkts	3 Pkts	-35 dBm	3.3 V
1784698070	171 Pkts	155 Pkts	-33 dBm	3.3 V
1784697170	163 Pkts	145 Pkts	-36 dBm	3.3 V
1784696270	154 Pkts	136 Pkts	-33 dBm	3.3 V
1784695370	143 Pkts	129 Pkts	-32 dBm	3.3 V
1784694470	128 Pkts	120 Pkts	-33 dBm	3.3 V
1784693570	117 Pkts	113 Pkts	-33 dBm	3.3 V
1784692670	107 Pkts	103 Pkts	-32 dBm	3.3 V
1784691770	93 Pkts	92 Pkts	-32 dBm	3.3 V
1784690870	79 Pkts	80 Pkts	-33 dBm	3.3 V
1784689970	65 Pkts	68 Pkts	-32 dBm	3.3 V
1784689070	40 Pkts	48 Pkts	-34 dBm	3.3 V
1784688170	24 Pkts	34 Pkts	-31 dBm	3.3 V
1784687270	18 Pkts	26 Pkts	-33 dBm	3.3 V
1784686370	9 Pkts	16 Pkts	-33 dBm	3.3 V
1784685470	3 Pkts	7 Pkts	-36 dBm	3.3 V
1784684464	10 Pkts	247 Pkts	-29 dBm	3.3 V

*Used Equation Coefficients:

RxPackets: 0, 1, 0

TxPackets: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, 1, -200

Voltage: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)