This is the latest recevied telemetry packets stored in our database for station/object SP6TK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1749523844 | 30 Count | 82 Count | 15 Count | 0 VDC | 0 VDC |
| 1749522643 | 566 Count | 1002 Count | 255 Count | 0 VDC | 0 VDC |
| 1749521441 | 537 Count | 916 Count | 240 Count | 0 VDC | 0 VDC |
| 1749520240 | 509 Count | 841 Count | 229 Count | 0 VDC | 0 VDC |
| 1749519039 | 482 Count | 755 Count | 216 Count | 0 VDC | 0 VDC |
| 1749515437 | 400 Count | 525 Count | 183 Count | 0 VDC | 0 VDC |
| 1749514236 | 365 Count | 465 Count | 169 Count | 0 VDC | 0 VDC |
| 1749513035 | 336 Count | 411 Count | 155 Count | 0 VDC | 0 VDC |
| 1749510634 | 280 Count | 328 Count | 129 Count | 0 VDC | 0 VDC |
| 1749509433 | 246 Count | 293 Count | 117 Count | 0 VDC | 0 VDC |
| 1749508232 | 218 Count | 255 Count | 105 Count | 0 VDC | 0 VDC |
| 1749507031 | 192 Count | 224 Count | 93 Count | 0 VDC | 0 VDC |
| 1749505830 | 166 Count | 201 Count | 82 Count | 0 VDC | 0 VDC |
| 1749503429 | 129 Count | 135 Count | 60 Count | 0 VDC | 0 VDC |
| 1749502242 | 101 Count | 100 Count | 48 Count | 0 VDC | 0 VDC |
| 1749501042 | 81 Count | 75 Count | 37 Count | 0 VDC | 0 VDC |
| 1749499841 | 58 Count | 46 Count | 23 Count | 0 VDC | 0 VDC |
| 1749498639 | 32 Count | 21 Count | 11 Count | 0 VDC | 0 VDC |
| 1749497438 | 1024 Count | 842 Count | 421 Count | 0 VDC | 0 VDC |
| 1749496238 | 995 Count | 817 Count | 410 Count | 0 VDC | 0 VDC |
| 1749495037 | 966 Count | 792 Count | 399 Count | 0 VDC | 0 VDC |
| 1749493836 | 939 Count | 768 Count | 388 Count | 0 VDC | 0 VDC |
| 1749491434 | 884 Count | 722 Count | 368 Count | 0 VDC | 0 VDC |
| 1749490233 | 859 Count | 700 Count | 357 Count | 0 VDC | 0 VDC |
| 1749489033 | 833 Count | 677 Count | 346 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)