EL-F5PLS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-F5PLS. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1765479157	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765477957	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765477357	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765474357	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765473757	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765473157	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	7 TXcount/10m
1765472556	0 RX Erlang	0.72 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765471957	0 RX Erlang	0.47 TX Erlang	0 RXcount/10m	15 TXcount/10m
1765470758	0 RX Erlang	0.09 TX Erlang	0 RXcount/10m	10 TXcount/10m
1765470157	0 RX Erlang	0.64 TX Erlang	0 RXcount/10m	10 TXcount/10m
1765469557	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	7 TXcount/10m
1765468357	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765467757	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765467157	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1765466557	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1765465957	0 RX Erlang	0.27 TX Erlang	0 RXcount/10m	10 TXcount/10m
1765465357	0 RX Erlang	0.8 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765464757	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	12 TXcount/10m
1765464157	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765463557	0 RX Erlang	0.58 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765462357	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1765461757	0 RX Erlang	0.57 TX Erlang	0 RXcount/10m	26 TXcount/10m
1765461157	0 RX Erlang	0.95 TX Erlang	0 RXcount/10m	15 TXcount/10m
1765460561	0 RX Erlang	0.83 TX Erlang	0 RXcount/10m	27 TXcount/10m
1765459957	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	5 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)