EL-DB0OHA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-DB0OHA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1765922889	0 RX Erlang	0.66 TX Erlang	0 RXcount/10m	13 TXcount/10m
1765921989	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765921089	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765920189	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765919289	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765918389	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765917489	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	2 TXcount/10m
1765916589	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765915689	0 RX Erlang	0.07 TX Erlang	0 RXcount/10m	4 TXcount/10m
1765914789	0 RX Erlang	0.12 TX Erlang	0 RXcount/10m	17 TXcount/10m
1765913889	0 RX Erlang	0.88 TX Erlang	0 RXcount/10m	25 TXcount/10m
1765912989	0 RX Erlang	0.87 TX Erlang	0 RXcount/10m	27 TXcount/10m
1765912089	0 RX Erlang	0.99 TX Erlang	0 RXcount/10m	10 TXcount/10m
1765910314	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m
1765909389	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1765908489	0 RX Erlang	0.07 TX Erlang	0 RXcount/10m	6 TXcount/10m
1765907589	0 RX Erlang	0.46 TX Erlang	0 RXcount/10m	25 TXcount/10m
1765906689	0 RX Erlang	0.72 TX Erlang	0 RXcount/10m	69 TXcount/10m
1765905789	0 RX Erlang	0.71 TX Erlang	0 RXcount/10m	27 TXcount/10m
1765904889	0 RX Erlang	0.58 TX Erlang	0 RXcount/10m	39 TXcount/10m
1765903989	0 RX Erlang	0.88 TX Erlang	0 RXcount/10m	26 TXcount/10m
1765903089	0 RX Erlang	0.72 TX Erlang	0 RXcount/10m	17 TXcount/10m
1765902189	0 RX Erlang	0.43 TX Erlang	0 RXcount/10m	16 TXcount/10m
1765901289	0 RX Erlang	0.07 TX Erlang	0 RXcount/10m	11 TXcount/10m
1765900389	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	3 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)