SIMLA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SIMLA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788642077	13.88 Volt	940 Pkt	240 Pkt	79 Pcnt
1788641476	13.88 Volt	950 Pkt	250 Pkt	78 Pcnt
1788640913	13.88 Volt	960 Pkt	240 Pkt	79 Pcnt
1788640277	13.88 Volt	950 Pkt	240 Pkt	81 Pcnt
1788639677	13.88 Volt	910 Pkt	230 Pkt	82 Pcnt
1788639081	13.88 Volt	840 Pkt	200 Pkt	80 Pcnt
1788638477	13.88 Volt	810 Pkt	200 Pkt	78 Pcnt
1788637877	13.88 Volt	840 Pkt	210 Pkt	77 Pcnt
1788637276	13.58 Volt	870 Pkt	210 Pkt	77 Pcnt
1788636677	13.88 Volt	890 Pkt	210 Pkt	77 Pcnt
1788636077	13.88 Volt	870 Pkt	210 Pkt	77 Pcnt
1788635483	13.88 Volt	870 Pkt	210 Pkt	77 Pcnt
1788634877	13.88 Volt	880 Pkt	220 Pkt	78 Pcnt
1788634276	13.8 Volt	840 Pkt	200 Pkt	77 Pcnt
1788633686	13.88 Volt	810 Pkt	200 Pkt	77 Pcnt
1788633078	13.88 Volt	790 Pkt	190 Pkt	76 Pcnt
1788632476	13.88 Volt	770 Pkt	190 Pkt	74 Pcnt
1788631876	13.88 Volt	750 Pkt	180 Pkt	73 Pcnt
1788631276	13.88 Volt	710 Pkt	170 Pkt	72 Pcnt
1788630676	13.88 Volt	710 Pkt	170 Pkt	73 Pcnt
1788630082	13.88 Volt	730 Pkt	170 Pkt	74 Pcnt
1788629476	13.88 Volt	730 Pkt	180 Pkt	76 Pcnt
1788628876	13.88 Volt	740 Pkt	180 Pkt	78 Pcnt
1788628278	13.88 Volt	770 Pkt	190 Pkt	79 Pcnt
1788627677	13.73 Volt	790 Pkt	190 Pkt	79 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)