This is the latest recevied telemetry packets stored in our database for station/object KC5ODS-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Battery*
Charging/AC*
GPS+Sat*
Current*
A5*
1782229629
43 Percent
2 Charge/On/Off
88 Sats/On/Off
0 mA
0 N/A
1782228729
44 Percent
2 Charge/On/Off
83 Sats/On/Off
0 mA
0 N/A
1782228598
45 Percent
2 Charge/On/Off
78 Sats/On/Off
0 mA
0 N/A
1782227589
45 Percent
2 Charge/On/Off
78 Sats/On/Off
0 mA
0 N/A
1782226989
46 Percent
2 Charge/On/Off
73 Sats/On/Off
0 mA
0 N/A
1782226750
46 Percent
2 Charge/On/Off
78 Sats/On/Off
0 mA
0 N/A
1782226691
47 Percent
2 Charge/On/Off
78 Sats/On/Off
0 mA
0 N/A
1782226360
47 Percent
2 Charge/On/Off
78 Sats/On/Off
0 mA
0 N/A
1782226208
47 Percent
2 Charge/On/Off
88 Sats/On/Off
0 mA
0 N/A
1782226028
48 Percent
2 Charge/On/Off
48 Sats/On/Off
0 mA
0 N/A
1782225739
48 Percent
2 Charge/On/Off
48 Sats/On/Off
0 mA
0 N/A
1782225701
57 Percent
2 Charge/On/Off
48 Sats/On/Off
0 mA
0 N/A
*Used Equation Coefficients:
Battery: 0, 1, 0
Charging/AC: 0, 1, 0
GPS+Sat: 0, 1, 0
Current: 0, 10, -1280
A5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)