RDSPRT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object RDSPRT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Volt*	Rx1h*	Dg1h*	Eff1h*
1765537861	14.03 Volt	40 Pkt	20 Pkt	88 Pcnt
1765537262	14.1 Volt	40 Pkt	20 Pkt	89 Pcnt
1765537261	14.1 Volt	40 Pkt	20 Pkt	89 Pcnt
1765536661	14.1 Volt	40 Pkt	20 Pkt	90 Pcnt
1765536061	14.1 Volt	30 Pkt	20 Pkt	89 Pcnt
1765535461	14.1 Volt	30 Pkt	20 Pkt	86 Pcnt
1765534861	14.1 Volt	30 Pkt	20 Pkt	85 Pcnt
1765534262	14.03 Volt	20 Pkt	20 Pkt	84 Pcnt
1765533662	14.1 Volt	20 Pkt	10 Pkt	72 Pcnt
1765533062	14.1 Volt	20 Pkt	10 Pkt	72 Pcnt
1765532467	14.1 Volt	20 Pkt	10 Pkt	70 Pcnt
1765531861	14.03 Volt	30 Pkt	10 Pkt	72 Pcnt
1765531262	14.1 Volt	30 Pkt	10 Pkt	69 Pcnt
1765530662	14.1 Volt	20 Pkt	10 Pkt	67 Pcnt
1765530062	14.1 Volt	30 Pkt	10 Pkt	78 Pcnt
1765529462	14.1 Volt	30 Pkt	10 Pkt	73 Pcnt
1765528862	14.1 Volt	20 Pkt	10 Pkt	78 Pcnt
1765528262	14.1 Volt	20 Pkt	10 Pkt	83 Pcnt
1765528262	14.1 Volt	20 Pkt	10 Pkt	83 Pcnt
1765527662	14.03 Volt	20 Pkt	10 Pkt	77 Pcnt
1765527079	14.1 Volt	20 Pkt	10 Pkt	63 Pcnt
1765526462	14.1 Volt	20 Pkt	10 Pkt	61 Pcnt
1765526462	14.1 Volt	20 Pkt	10 Pkt	61 Pcnt
1765525862	14.1 Volt	20 Pkt	10 Pkt	61 Pcnt
1765525262	14.03 Volt	20 Pkt	10 Pkt	59 Pcnt

*Used Equation Coefficients:

Volt: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)