E23JWE-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E23JWE-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR *	VBAT*
1781369897	27.85 °C	86.1 %RH	1010.3 hPa	3.81 V
1781369297	28 °C	85 %RH	1010.3 hPa	3.82 V
1781368697	28.08 °C	84.7 %RH	1010.4 hPa	3.8 V
1781368097	28.16 °C	84.1 %RH	1010.4 hPa	3.82 V
1781367497	28.15 °C	84.1 %RH	1010.4 hPa	3.81 V
1781366897	28.27 °C	81.9 %RH	1010.3 hPa	3.82 V
1781366297	28.39 °C	82.6 %RH	1010.5 hPa	3.82 V
1781365697	28.49 °C	81.4 %RH	1010.4 hPa	3.82 V
1781365100	28.75 °C	79.8 %RH	1010.5 hPa	3.82 V
1781364497	28.97 °C	78.3 %RH	1010.4 hPa	3.82 V
1781363897	28.92 °C	78.2 %RH	1010.3 hPa	3.82 V
1781363297	28.94 °C	79.2 %RH	1010.3 hPa	3.82 V
1781362696	28.86 °C	78.6 %RH	1010.2 hPa	3.81 V
1781362097	29.01 °C	77.7 %RH	1010.3 hPa	3.83 V
1781361496	28.92 °C	78.5 %RH	1010.4 hPa	3.83 V
1781360897	28.83 °C	79.7 %RH	1010.2 hPa	3.82 V
1781360296	28.88 °C	80 %RH	1009.9 hPa	3.82 V
1781359697	29.24 °C	80 %RH	1009.9 hPa	3.83 V
1781359096	29.13 °C	77.6 %RH	1009.7 hPa	3.82 V
1781358496	29.08 °C	78.5 %RH	1009.7 hPa	3.83 V
1781357896	29.16 °C	79.4 %RH	1009.5 hPa	3.83 V
1781357296	29.29 °C	78.2 %RH	1009.4 hPa	3.82 V
1781356696	29.17 °C	78.8 %RH	1009.3 hPa	3.84 V
1781356096	29.09 °C	79.9 %RH	1009.1 hPa	3.83 V
1781355496	29.11 °C	79 %RH	1008.9 hPa	3.84 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR : 0, 0.1, 800

VBAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)