SP5UID Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP5UID. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*
1787575483	2 Count	378 Count
1787571886	1 Count	178 Count
1787568285	0 Count	0 Count
1787564684	3 Count	836 Count
1787561083	2 Count	623 Count
1787557488	1 Count	432 Count
1787553886	0 Count	263 Count
1787550284	3 Count	1044 Count
1787546683	2 Count	727 Count
1787543086	1 Count	359 Count
1787539484	0 Count	0 Count
1787535885	1 Count	728 Count
1787532283	0 Count	375 Count
1787528683	3 Count	1055 Count
1787525082	2 Count	680 Count
1787521482	1 Count	335 Count
1787517881	0 Count	0 Count
1787514283	3 Count	903 Count
1787510682	2 Count	618 Count
1787507082	1 Count	317 Count
1787503481	0 Count	0 Count
1787499883	3 Count	941 Count
1787496282	2 Count	694 Count
1787492681	1 Count	431 Count
1787489080	0 Count	200 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)