N2RWE-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N2RWE-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1784700752	13.65 Volt	340 Pkt	60 Pkt	58 Pcnt
1784700153	13.65 Volt	350 Pkt	60 Pkt	58 Pcnt
1784699552	13.43 Volt	330 Pkt	60 Pkt	57 Pcnt
1784698958	13.65 Volt	340 Pkt	60 Pkt	57 Pcnt
1784697752	13.65 Volt	340 Pkt	50 Pkt	53 Pcnt
1784697152	13.65 Volt	330 Pkt	50 Pkt	52 Pcnt
1784696552	13.65 Volt	340 Pkt	50 Pkt	54 Pcnt
1784695959	13.65 Volt	340 Pkt	50 Pkt	54 Pcnt
1784695352	13.65 Volt	340 Pkt	50 Pkt	53 Pcnt
1784694752	13.65 Volt	340 Pkt	60 Pkt	55 Pcnt
1784694152	13.65 Volt	310 Pkt	50 Pkt	53 Pcnt
1784692352	13.73 Volt	310 Pkt	50 Pkt	53 Pcnt
1784691752	13.73 Volt	290 Pkt	50 Pkt	51 Pcnt
1784691152	13.73 Volt	270 Pkt	40 Pkt	48 Pcnt
1784689352	13.8 Volt	210 Pkt	30 Pkt	38 Pcnt
1784688752	13.8 Volt	200 Pkt	30 Pkt	35 Pcnt
1784688157	13.8 Volt	190 Pkt	20 Pkt	35 Pcnt
1784687552	13.88 Volt	190 Pkt	20 Pkt	34 Pcnt
1784686959	13.88 Volt	210 Pkt	20 Pkt	35 Pcnt
1784685753	13.88 Volt	200 Pkt	30 Pkt	34 Pcnt
1784685153	13.95 Volt	200 Pkt	30 Pkt	35 Pcnt
1784684552	13.95 Volt	230 Pkt	30 Pkt	41 Pcnt
1784683956	13.95 Volt	230 Pkt	30 Pkt	44 Pcnt
1784683353	14.03 Volt	230 Pkt	30 Pkt	46 Pcnt
1784682155	14.1 Volt	250 Pkt	30 Pkt	53 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)